Citizen CH-656C Automatic power-off function, When there are already 7 sets of results, Second

Page 9

When there are already 7 sets of results in

3. Turn Power off

memory, the oldest one is automatically erased

 

and overwritten with the newest.

 

English

(2 second)

(1 second)

Blood pressure values and pulse rate display al- ternatively on the display. Display of the mea- surement result will continue until power is turned off.

Press the “POWER/START” switch to turn off.

CAUTION

To discontinue a measurement for any reason, press the “POWER/START” switch. This causes the “wrist cuff” to deflate rapidly.

4. Automatic power-off function

If the unit is left on after measurement an au- tomatic power-off function turns the power off after approximately 3 minutes. To continue measurement press the “POWER/START” switch turning the unit on.

- Eng 9 -

Image 9
Contents Model CH-656C General Remarks Cleaning Method of CuffDiastolic Systolic Blood PressurePrecautions for use Precaution for USE and MaintenanceFor proper measurement of blood pressure Do not measure blood pressure after bathing or drinkingNature and frequency of maintenance Precautions for maintenanceProtect the nature environment Congestion, swelling, etc. may occur in some peopleDiastolic blood pressure Pulse display section Identification of PartsBattery Replacement Measurement ProceduresAttaching of wrist cuff To start the Measurement Press the Power/Start switchPressurization and measuring start Automatic power-off function When there are already 7 sets of resultsSecond Memory recall Memory clear function Description of Display Marks Consumer Electronics Division