Citizen CH-656C instruction manual Pressurization and measuring start

Page 8

The heart symbol flashes, and the buzzer sounds for 1 second. Once the measurement prepara- tions are completed, the buzzer sounds three more times.

If batteries become weak, “ ” mark is dis- played and measurement is discontinued.

Pressurization and measuring start.

When a pulse is detected, the pressure value moves to the lower side of the display. At this time the mark “Q” flashes and buzzer beeps.

Once the blood-pressure measurement has sta- bilized, pressurization is discontinued, the air in the cuff is automatically let out, the buzzer sounds for about 2 seconds, and the high and low blood pressure are respectively displayed one above the other.

Unless an error is generated, the measurement results are automatically stored in memory. Up to 7 sets of results can be stored in memory.

- Eng 8 -

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Model CH-656C Cleaning Method of Cuff General RemarksDiastolic Systolic Blood PressurePrecaution for USE and Maintenance Precautions for useFor proper measurement of blood pressure Do not measure blood pressure after bathing or drinkingPrecautions for maintenance Nature and frequency of maintenanceProtect the nature environment Congestion, swelling, etc. may occur in some peopleIdentification of Parts Diastolic blood pressure Pulse display sectionAttaching of wrist cuff Battery ReplacementMeasurement Procedures Press the Power/Start switch To start the MeasurementPressurization and measuring start Second Automatic power-off functionWhen there are already 7 sets of results Memory recall Memory clear function Description of Display Marks Consumer Electronics Division
Top Page Image Contents