Citizen CH-656C Battery Replacement, Measurement Procedures, Attaching of wrist cuff

Page 6

BATTERY REPLACEMENT

1.To use this unit, you must install batteries,

and also If battery mark “ ” will display on the display, you must change two pieces of batteries.

2.Open battery cover as illustrated.

Replace the new two pieces of batteries, matching the (+) and (–) polarities on each battery with the polarity marks on the case.

3.“LR03” batteries or equivalent is suitable for this blood pressure meter.

•Pull the transparent ribbon to remove the bat- teries.

MEASUREMENT PROCEDURES

1. Attaching of wrist cuff

The blood pressure is measured at the wrist. Therefore, rolling up the sleeve is no longer necessary. The pressure cuff has integrated into the wristlet.

Wind the wristlet around your left wrist. The wrist should be free. The display is at the in- ner of the wrist.

- Eng 6 -

Image 6

Contents Model CH-656C Diastolic Cleaning Method of CuffGeneral Remarks Systolic Blood PressureFor proper measurement of blood pressure Precaution for USE and MaintenancePrecautions for use Do not measure blood pressure after bathing or drinkingProtect the nature environment Precautions for maintenanceNature and frequency of maintenance Congestion, swelling, etc. may occur in some peopleIdentification of Parts Diastolic blood pressure Pulse display sectionBattery Replacement Measurement ProceduresAttaching of wrist cuff Press the Power/Start switch To start the MeasurementPressurization and measuring start Automatic power-off function When there are already 7 sets of resultsSecond Memory recall Memory clear function Description of Display Marks Consumer Electronics Division