Citizen CH-452 Calling UP the Data Stored in Memory, HOW to Call UP the Data, Español

English Español Português

Italiano 中文 Français

CALLING UP THE DATA STORED IN MEMORY

•90 measurement results can be stored in the memory.

• Except for the case where the unit is engaged in measurement, press “MEMORY” switch to call up the values (measurement results) stored in memory to the display.

*To erase all the data, remove the batteries. All the stored data is erased.

HOW TO CALL UP THE DATA

• Press the “MEMORY” switch.

• “3A” indicating the average value appears on the left section of the display. Then, the average value, based on the last three measurements, is displayed. (“3A” and the average value do not appear if there are two or fewer measurements stored in memory.)

• Press the “MEMORY” switch again. This recalls and displays first the memory number and then the last set of data stored.

CALLING UP THE DATA STORED IN MEMORY

			English
•	Press the “MEMORY” switch again. This		Español
	recalls and displays the second last set of
	data stored. Each time you press this switch,
	the unit displays the data prior to the last set
	of data displayed.
			Português
•	The value stored in memory is numbered in		Deutsch
	the order of measurements. For example,
	when 90 sets of data are stored in memory,
	the data number 1 represents the latest data.
	Data number: 1, 2, 3, ...	... 89, 90
	©	©
	The latest	The earliest	Italiano
	in display by pressing and holding the
	data	data
*	You can fast-forward the data numbers
	“MEMORY” switch.
			中文
			Français

- Eng 18 - - Eng 19 -