Automatic power off function, Battery replacement

—Memory function works on for approximately 3 seconds or until another switches are pressed. (Even if the last mea- sured value is displayed, you are able to start the mea- surements by pressing of “Start Switch” or you are able to change the pressure-setting value by pressing of “Pres- sure Setting Switch” or you are able to turn OFF by de- pressing of “Power Switch”)

—Memory recall function does not work during automatic inflation and blood pressure measurement are being made.

—New blood pressure value is stored in memory at press- ing “Power Switch” for turn OFF or at pressing “Start Switch” for new measurement.

9. Automatic power off function

If this unit is left on after measurement, an Automatic Power- OFF Function turns the power OFF after approximately 3 min- utes. To continue measurement press the power switch to turn the unit ON.

10. Battery replacement

If the batteries become weak, the “” mark will appear in the display, indicating that batteries should be replaced with new ones.

Remove the battery cover at mainframe and replace the new four pieces of batteries.

Type “AA” (R6P, LR6) battery or equivalent is suitable for this blood pressure monitor.

English

- Eng 11 -