SYSTOLIC mmHg |
| DIASTOLIC mmHg | ||||||
AVE. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | PULSE/min |
| ||||||||
When a pulse is detected, the pressure value moves to the right side of the display. At this time the mark “Q” flashes and buzzer sounds.
SYSTOLIC mmHg |
| DIASTOLIC mmHg | ||||||
AVE. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | PULSE/min |
| ||||||||
When the diastolic pressure value is detected, the measure- ment is completed and buzzer sounds.
Systolic pressure is displayed on the left and diastolic pres- sure on the right side of the display.
2 to 3 seconds after completion of measurements, the mark “▼ ” appears and air will deflate immediately.
SYSTOLIC mmHg |
| DIASTOLIC mmHg | ||||||
AVE. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | PULSE/min |
| ||||||||
2 or 3 seconds later, pressure value and pulse appear alter- nately on the display.
5. | Turn power off |
| English |
Press the “Power Switch” to turn OFF. | |||
6. | Subsequent measurements | ||
|
| H- |
|
|
| 403C |
|
| SELECT |
|
|
| MEMORY | POWER |
|
| START |
| |
When a measurement need to be made again, just press the “Start Switch” again.
7. Change of the pressure-setting value
SELECT
MEMORY
START | POWER |
When the pressure setting is needed to be changed, press the “Pressure Setting Switch” and select optimum value.
- Eng 9 -