Wind the arm cuff around the left upper arm tightly so that the bottom edge of the cuff is positioned about
1 – 2cm
•When you wind the cuff, please wind the cuff next to the skin as possible. (If measurement is made by rolling the shirts or jacket up over the arm, this will constrict the up- per arm and prevent accurate measurement)
Rubber cuff hose should be placed on the inside of your arm as figures.
English
The cuff should be wound so that one finger can be in- serted under the cuff. Note that uneven cuff winding will prevent proper measurements.
Rest the elbow on a table so that the section of the upper arm is at the height of the heart. Relax the lower arm across the table and remain still.
Make measurements in either a seated or reclining pos- ture.
- Eng 7 -