Golden Technologies GL110 Seating, Armrest Width Adjustment, Flip-up Armrests, Armrest Angle

LiteRider™ Owner’s Manual Rev.A_122810

V. OPERATION

SEATING

Armrest Width Adjustment

To adjust the armrest width:

1.Loosen the adjustment knobs at the rear of the seat. See #1 on figure 6.

2.Slide the armrests in or out to the desired width.

3.Tighten the adjustment knobs.

Be sure adjustments knobs are securely

tightened against the inserted armrest tube. Do not1 exceed the maximum armrest width of 24 in.

Flip-up Armrests

Pull up on the end of either armrest to flip it up

for easy transfer on and off your Golden LiteRider™. See #1 on figure 7.

Armrest Angle

To increase the armrest angle, turn the armrest angle screw counterclockwise. See #2 on figure 7. To decrease the armrest angle, turn the armrest angle screw clockwise.

Seat Rotation Lever

The seat can be rotated through 360° and locked at any 45° position.

1.Push down on the seat rotation lever and rotate the seat to the desired position. See #1 on figure 8.

2.Release the handle to lock the seat at any

45° position.

Seat Height Adjustment

To adjust the seat height:

1.Lift the seat up and off of the seat pedestal.

2.Remove the nut and bolt that holds the seat post in the seat pedestal. See #2 on figure 8.

3.Position the seat post at the desired height while aligning the holes in the seat post and the seat pedestal.

4.Reinstall the nut and bolt.

5.Replace the seat back onto the seat pedestal.

Figure 6. Armrest Width Adjustment

1

2

Figure 7. Flip-up/Angle Adjustment

1

2

Figure 8. Seat Height/Rotation Adjustment

18