Sunrise Medical G-424 Battery Removal, SWING-AWAY Footrests, Elevating Legrest Optional

Page 15

I X . S E T - U P , A D J U S T M E N T & U S E

I X . S E T - U P , A D J U S T M E N T & U S E

A. BATTERY REMOVAL

To remove the batteries for transporting or servicing:

I.Remove Batteries

a)Lift up deck lid (A).

b)Unplug and remove batteries from rear of chair (B).

c)Lift up batteries by lifting up on battery straps (C).

A

D

C. SWING-AWAY FOOTRESTS

1.

Installation

 

a)

Place swing-away pivot pin (A) into

 

 

the locating hole (B) on top of the

 

 

hanger mount with the footrest facing

 

 

outward from frame.

 

b)

Rotate the footrest inward until latch

 

 

plate locks into place on locking bolt.

2.

Removal

A

B

II.Alternate Battery Removal Recommended method for Group 24 batteries.

a)Remove seat by removing quick- release pins attaching seat to mount.

b)Lift seat off seat mounts.

c)Release all release levers (D) on the top of the shroud cover.

d)Remove the shroud cover to expose the batteries.

e)Unplug and lift up batteries by lifting up on the battery straps.

III. Battery Installation

See Section XI. Batteries, D for installation and wiring diagram.

B

C

a)

To remove footrest, press quick-

 

release lever (C).

b)

Rotate footrest outward and lift.

3. Height Adjustment

a)

Remove bolts (D) and washer from

 

the hanger tube.

b)

Reposition footplate by aligning holes

 

and reinstalling bolts (D).

 

Additional range available with other

 

length extension tubes.

D. ELEVATING LEGREST (OPTIONAL)

1.

Installation

 

To install or remove Elevating Legrest

 

(ELR) see instructions for Swing-away

 

Footrest installation above.

2.

Adjustment

 

a) To raise legrest, lift to desired position.

C

D

Batteries may weigh up to 55 lbs. Care must be taken to avoid injury when lifting up on battery straps (C).

B. FOOTPLATE HEIGHT

ADJUSTMENT

1.Installation

The single footplate can be adjusted to three different settings.To change the height of the footplate:

Remove bolt (A)

Move footplate to desired height

Re-install bolt (A) through desired hole

Legrest will automatically lock in place.

b) To lower legrest, while seated in chair,

first lift slightly, then press release

lever (E) up and lower legrest to

desired position.

E. INTEGRAL JOYSTICK

1.To Connect

a)Line up receptacle on large rectangular connector (Beau Connector) located behind the seat with the pins on the connecter located on the joystick harness.

b)Push in firmly.

2.To Disconnect

E

Pull up on connector until it disconnects from the frame mounted receptacle, located behind the seat.

930484 Rev. A

28

29

930484 Rev. A

Image 15
Contents Quickie G-424 For Answers to Your Questions Sunrise ListensIII EMI Electromagnetic InterferenceVII. Warnings Components & Options Quickie G-424 Review this Manual Often Choose the Right Chair & Safety OptionsAdjust Chair to Your Ability What is EMI?Report ALL Suspected EMI Incidents Sources of EMIDistance from the Source Immunity LevelChanges & Adjustments Weight LimitController Settings Safety CHECK-LISTTerrain When Seated in a Parked WheelchairMotor Vehicle Safety Environmental ConditionsIf YOU Must Reach or LEAN, do SO AT Your OWN Risk TransfersReaching or Leaning To Reduce the Risk of Injury AND/OR Damage to the ChairTo Reduce the Risk of a FALL,TIP-OVER or Loss Control ObstaclesDriving in Reverse RAMPS, Slopes & SidehillsEscalators Wheelchair LiftsCurbs & Single Steps StairsPneumatic Tires ON/OFF SwitchFootplate & Footrests Motor LocksTo Descend a Curb or Single Step Upholstery FabricSuspension To Climb a Curb or Single StepCHECK-OUT Tools YOU will NeedElevating Legrest Optional Battery RemovalFootplate Height Adjustment SWING-AWAY FootrestsRemote Joystick SWING-AWAY Retractable Mount Optional Remote Joystick InstallationTo Adjust the Height of the Remote Joystick Angle Adjustment ArmrestsSeat Height Adjustment BackrestFolding Backrest Seat Frame Seat Removal Contour & Highback Contour Seats Shroud RemovalParapak Seat Sling Seat Frame Circuit Breakers Performance Control SettingsQuickie Qtronix Programmer PAD Optional Thermal ROLL-BACKRemote Joystick Assembly Optional Introduction Battery ChargerAcid Burns Unsealed WET Cell Batteries Connecting Batteries in Battery WellStorage Tips CleaningBattery Maintenance Disposing of BatteriesTo Repair or Replace a Tire Motor Brushes Use a torque setting of 420 in.-lbs. to re-tighten boltsMaintenance Chart Reassemble the wheelWhat WE will do Additional WarrantyFor Life LimitationsSunrise Medical Inc

G-424 specifications

The Sunrise Medical G-424 is a state-of-the-art manual wheelchair that showcases the perfect blend of functionality, comfort, and advanced technology. Designed for users who demand versatility and performance in their mobility solutions, the G-424 stands out due to its impressive features that cater to a wide range of individual needs.

One of the hallmark features of the G-424 is its lightweight frame, constructed from high-strength aluminum, which enhances both durability and portability. Weighing significantly less than traditional wheelchairs, the G-424 allows for easier transport and maneuverability, making it an excellent choice for users who lead an active lifestyle. The folding design adds convenience, enabling the wheelchair to fit comfortably in car trunks or storage spaces.

The G-424 is equipped with ergonomic seating systems that ensure a comfortable experience during prolonged use. The adjustable seat depth and height make it customizable to meet individual comfort requirements, while the breathable upholstery promotes airflow and helps regulate body temperature. This attention to user comfort is essential for enhancing the overall experience and encouraging longer days out and about.

Stability and safety are paramount in the design of the G-424. The wheelchair features a rigid frame that significantly reduces flex during movement, providing a stable base that supports confident navigation. Moreover, the G-424 comes with robust anti-tippers that enhance safety on inclines and declines, giving users peace of mind as they navigate various terrains.

Incorporating advanced technologies, the G-424’s wheel and tire system enhances both performance and usability. The quick-release wheels make it easy to transport and store, while the puncture-resistant tires ensure reliability and independence, reducing maintenance concerns for users. The wheelchair also employs height-adjustable armrests, which can be customized for maximum support.

In terms of aesthetics, the G-424 offers a range of color options and stylish designs, allowing users to express their personality while maintaining a reliable mobility solution. The combination of features and thoughtful engineering makes the Sunrise Medical G-424 not just a wheelchair, but a reliable companion for users seeking independence and life quality enhancement on their daily journeys. Whether it’s for day-to-day errands or recreational activities, the G-424 is built to meet the demands of modern life while prioritizing user comfort and safety.