Sunrise Medical G-424 Remote Joystick Installation, To Adjust the Height of the Remote Joystick

Page 16

I X . S E T - U P , A D J U S T M E N T & U S E

I X . S E T - U P , A D J U S T M E N T & U S E

F. REMOTE JOYSTICK

INSTALLATION

1.To Connect

a)Line up female cylindrical connector

(C) with its male receptacle on the end of the power cable (D).

b)Push in firmly.

2.To disconnect

Pull back on the retaining ring of the cylindrical connector (C) until it disconnects from the power cable (D).

G. TO ADJUST THE HEIGHT OF THE REMOTE JOYSTICK

a)Remove the two pan-head screws (A), securing the angle bracket mount (B).

b)Remove the joystick from the mount by unfastening the two screws (C) on the underside of the mount.

c)Position angle bracket mount such that you achieve the desired joystick height. Four positions are available by relocating the mount either on the top or bottom of the mounting bar (D) and/or by rotation of the angle bracket mount.

H.REMOTE JOYSTICK SWING-AWAY RETRACTABLE MOUNT (OPTIONAL)

The joystick is mounted with a mechanism which allows the control to be locked in a forward or retracted position.

1.Adjustment

a)To retract joystick, press firmly on inside of joystick (E).

b)Push joystick away from front of armrest until it locks into retracted position.

c)To return to forward position, pull to release magnetic catch and swing.

d)Tension adjustment can be made by tightening through bolt (F).

D

C

BA

C

D

E

F

I.FLIP BACK WIDTH ADJUSTABLE ARMRESTS (CONTOUR & HIGH BACK CONTOUR SEAT)

1.Installation/Removal or Adjustment

a)Insert armrest support (A) inside of 1" square tube (B) located on back of the seat.

b)Repeat for other side of seat.

c)Position armrest at appropriate width.

d)Tighten set screws (C) on square tube using allen wrench.

J.ANGLE ADJUSTMENT ARMRESTS

1.Adjustment

a)Flip back armrest.

b)Adjust the angle of the armrest by turning the bolt (D) clockwise to reduce the angle and counter clockwise to increase the angle.

c)Fully tighten the jam nut.

K. DUAL-POST HEIGHT-ADJUSTABLE FLIP-BACK ARMRESTS

(SEAT FRAME ONLY)

The dual-post flip-back armrest can be used as either a flip-back armrest or a removable armrest.

1.Installing Armrest

a)Flip levers A and B to open receivers.

b)Insert front and rear armrest posts into receivers.

c)Flip levers A and B to engage.

2.Set-up for Flip-back Operation

a)Flip lever A so front post is able to lift free.

b)Armrest now has the ability to be flipped back without removal.

3.Set-up for Removal

a)Flip levers A and B so front and rear posts are able to lift out freely.

b)Armrest can now be easily removed for transferring.

4.Height-Adjustment

a)Release the upper securing lever (C).

b)Set at desired height

c)Return securing lever to locked position.

d)Move armrest up or down to allow armrest to snap into place.

C

A

B

D

B

A

C

930484 Rev. A

30

31

930484 Rev. A

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Quickie G-424 Sunrise Listens For Answers to Your QuestionsEMI Electromagnetic Interference IIIVII. Warnings Components & Options Quickie G-424 Choose the Right Chair & Safety Options Adjust Chair to Your AbilityWhat is EMI? Review this Manual OftenSources of EMI Distance from the SourceImmunity Level Report ALL Suspected EMI IncidentsWeight Limit Controller SettingsSafety CHECK-LIST Changes & AdjustmentsWhen Seated in a Parked Wheelchair Motor Vehicle SafetyEnvironmental Conditions TerrainTransfers Reaching or LeaningTo Reduce the Risk of Injury AND/OR Damage to the Chair If YOU Must Reach or LEAN, do SO AT Your OWN RiskObstacles Driving in ReverseRAMPS, Slopes & Sidehills To Reduce the Risk of a FALL,TIP-OVER or Loss ControlWheelchair Lifts Curbs & Single StepsStairs EscalatorsON/OFF Switch Footplate & FootrestsMotor Locks Pneumatic TiresUpholstery Fabric SuspensionTo Climb a Curb or Single Step To Descend a Curb or Single StepTools YOU will Need CHECK-OUTBattery Removal Footplate Height AdjustmentSWING-AWAY Footrests Elevating Legrest OptionalRemote Joystick Installation To Adjust the Height of the Remote JoystickAngle Adjustment Armrests Remote Joystick SWING-AWAY Retractable Mount OptionalBackrest Seat Height AdjustmentFolding Backrest Seat Frame Shroud Removal Seat Removal Contour & Highback Contour SeatsParapak Seat Sling Seat Frame Performance Control Settings Quickie Qtronix Programmer PAD OptionalThermal ROLL-BACK Circuit BreakersRemote Joystick Assembly Optional Battery Charger IntroductionConnecting Batteries in Battery Well Acid Burns Unsealed WET Cell BatteriesCleaning Battery MaintenanceDisposing of Batteries Storage TipsTo Repair or Replace a Tire Use a torque setting of 420 in.-lbs. to re-tighten bolts Maintenance ChartReassemble the wheel Motor BrushesAdditional Warranty For LifeLimitations What WE will doSunrise Medical Inc

G-424 specifications

The Sunrise Medical G-424 is a state-of-the-art manual wheelchair that showcases the perfect blend of functionality, comfort, and advanced technology. Designed for users who demand versatility and performance in their mobility solutions, the G-424 stands out due to its impressive features that cater to a wide range of individual needs.

One of the hallmark features of the G-424 is its lightweight frame, constructed from high-strength aluminum, which enhances both durability and portability. Weighing significantly less than traditional wheelchairs, the G-424 allows for easier transport and maneuverability, making it an excellent choice for users who lead an active lifestyle. The folding design adds convenience, enabling the wheelchair to fit comfortably in car trunks or storage spaces.

The G-424 is equipped with ergonomic seating systems that ensure a comfortable experience during prolonged use. The adjustable seat depth and height make it customizable to meet individual comfort requirements, while the breathable upholstery promotes airflow and helps regulate body temperature. This attention to user comfort is essential for enhancing the overall experience and encouraging longer days out and about.

Stability and safety are paramount in the design of the G-424. The wheelchair features a rigid frame that significantly reduces flex during movement, providing a stable base that supports confident navigation. Moreover, the G-424 comes with robust anti-tippers that enhance safety on inclines and declines, giving users peace of mind as they navigate various terrains.

Incorporating advanced technologies, the G-424’s wheel and tire system enhances both performance and usability. The quick-release wheels make it easy to transport and store, while the puncture-resistant tires ensure reliability and independence, reducing maintenance concerns for users. The wheelchair also employs height-adjustable armrests, which can be customized for maximum support.

In terms of aesthetics, the G-424 offers a range of color options and stylish designs, allowing users to express their personality while maintaining a reliable mobility solution. The combination of features and thoughtful engineering makes the Sunrise Medical G-424 not just a wheelchair, but a reliable companion for users seeking independence and life quality enhancement on their daily journeys. Whether it’s for day-to-day errands or recreational activities, the G-424 is built to meet the demands of modern life while prioritizing user comfort and safety.
Top Page Image Contents