Preparing your wheelchair for use
Fitting footrests
Firstly, offer the footrest assembly at right angles to the frame (Fig. 5), locate the stem into the frame tube and swing assembly forward as shown in Fig. 6 to lock in position. To swing away the footrest, simply depress the retaining catch and turn the footrest out. This can now be lifted out if required.
Seat back fitting and removal
The seat back is fitted by sliding the two mounting tubes into the two receivers as shown in Fig. 7.
Once in place the two locking knobs must be firmly tightened to secure the backrest. To remove the backrest simply reverse the fitting procedure.
NOTE
Please note this does not apply to Recaro Seat option.
Fig. 5
Retaining catch
Fig. 6
Locking knobs
Receiver
Fig. 7
Issue 7 | 16 |
|
|