70° Legrest
Fitting
Follow the instructions for the fitting and removal of legrests as stated on page 21 and the adjustment of the footplates as stated on page 22. See Fig. 18 and 19 below.
Fig. 18
WARNING
With the leg in an elevated position it is more likely that the user could injure the leg on obstacles in the environment. Make sure that you are aware of your terrain and be cautious when driving the chair that your leg cannot impact on anything around you.
Do not drive your chair too close to any source of open flame. With your leg in an elevated position you may not know that the bottom of the footplate is getting hot.
Inspect the legrest, footplate and heel loop regularly for signs of damage or wear. Damage to the legrest could result in the users leg being dropped and could cause injury.
Cleaning Instructions
Footrest - Clean with a damp soapy cloth.
Paintwork - Clean with a damp soapy cloth. Do not use abrasive cleaners or cloths.
Make sure that the legrest is completely dry before using.
Fig. 19
23 | Issue 7 |
|
|