Attendant and Dual Control, Pilot+
Note
The Attendant control system is the Standard Control System mounted at the rear of the chair for use by an attendant only. Please refer to the Standard Control System user guide for usage instructions. See pages 34 - 40.
You should be aware that the attendant has the power to overide the control of the chair on a dual control system.
Cleaning instructions
Should the control of your wheelchair become soiled or dirty, it can be wiped with a damp cloth with a dilute disinfectant until clean. This is important should the wheelchair be used by more than one person to ensure there is no cross infection.
WARNING
Ensure that you set the speed of the attendent control to a speed that you can comfortably follow.
Ensure that you always have comfortable access to the controls whilst the chair is moving and make sure that the controller is fixed securely to the chair.
It is important that the joystick boot is replaced if it is torn or brittle, failing to do so could cause substance damage to the controller and unexpected movement of the chair.
Always turn off the power to the controller when leaving the user in the chair.
Do not replace the joystick knob with any unauthorised item. It may cause hazardous operation and loss of control of the chair.
Issue 7 | 42 |
|
|