Centre tray mounted Pilot+
Cleaning instructions | WARNING |
The tray must be regularly cleaned using a soapy damp cloth.
Do not use abrasive cleaners or cloths as they could scuff the surface of the tray Do not use solvents.
Make sure that the tray is thoroughly cleaned regularly especially if the chair is to be used by another user.
Should the control of your wheelchair become soiled or dirty, it can be wiped with a damp cloth with a dilute disinfectant until clean. This is important should the wheelchair be used by more than one person to ensure there is no cross infection.
Fitting
Affix the mounting tube to the underside of the armrest with the 2 screws provided. Now slide the extruding bar into the mounting bracket until it clicks into place. See Fig. 46.
The maximum weight allowed for the tray is 2.5kg.
Do not to overload the tray, this could cause the tray to break or could cause the chair to become unstable.
Ensure that you always have comfortable access to the controls whilst the chair is moving and make sure that there is nothing on the tray that could interfere with your control of the chair.
It is important that the joystick boot is replaced if it is torn or brittle, failing to do so could cause substance damage to the controller and unexpected movement of the chair.
Always turn off the power to the controller before moving the tray out of the way.
Do not leave lit cigarettes or other heat sources on the tray as this could cause the tray to deform and mark.
Ensure that all extremities and clothing are free when positioning the tray for use.
Do not replace the joystick knob with any unauthorised item. It may cause hazardous operation and loss of control of the chair.
Fig. 46
Issue 7 | 44 |
|
|