REPAIR AND MAINTENANCE
Note: Rear wheel hardware sequence
18-4
4Remove wheel and install replacement wheel.
(Note the sequence of the hardware)
7 Re-attach the chain guard.
5 Push the chain tensioner down to install the chain on both sprockets.
6 With two 13 mm open wrenches,
Left Side (Brake)
Frame
Middle
REPAIR AND MAINTENANCE
qBattery Care and Disposal
Do not store in freezing or below freezing temperatures. To properly maintain your battery and ensure maximum battery life, carefully read the “Charging the Battery” section on page 3 of this owner’s manual.
CONTAINS SEALED LEAD ACID BATTERIES. BATTERIES MUST BE RECYCLED.
Disposal: Your Razor product uses sealed
Do not dispose of a
qCharger
The charger supplied with the electric scooter should be regularly examined for damage to the cord, plug, enclosure and other parts. In the event of such damage, the product must not be charged until it has been repaired or replaced.
Use ONLY the charger supplied with this product or a replacement specified by Razor.
qWheels
Wheels and drive system are subject to normal wear and tear. It is the responsibility of the user to periodically inspect wheels for excess wear, and to adjust and replace drive train components as required.
qReplacement Parts
For the complete selection of replacement parts visit www.razor.com.
qRepair Centers
For a list of authorized Razor repair centers:
•Check online at www.razor.com.
•Call
Right Side (Throttle)
Frame
WARNING: If a battery leak develops, avoid any contact with leaking acid and place the damaged battery in a plastic bag. Refer to the disposal instructions at left. If acid comes into contact with skin or eyes, flush with cool water for at least 15 minutes and contact a physician.
WARNING: Battery posts, terminals and related accessories contain lead and lead compounds. Wash your hands after handling.
Need Help? Visit our website for replacement parts, product support and a list of authorized service centers at www.razor.com or call toll free
6