V . C O M F O R T A D J U S T M E N T S
Controller Position
You can position the controller for either
To change the controller position:
1.Turn off the power to the controller.
2.Disconnect the controller from the electronics tray.
3.Cut the wire tie(s) securing the controller cable to the armrest.
4.Flip up the armrest and loosen the setscrew. See figure 21.
5.Slide the controller out of the armrest.
6.Loosen the setscrew in the other armrest.
7.Place the controller in the other armrest.
8.Tighten the setscrew to secure the controller.
9.Use a wire tie to secure the controller cable to the armrest.
10.Connect the controller to the electronics tray.
Swing-away Footrests
To rotate the SFRs:
1.Push in the release lever. See figure 22.
2.Rotate the SFRs.
To adjust the SFR length:
1.Remove the two adjustment screws from the side of each footrest extension. See figure 22.
2.Slide the footrest up or down to the desired length.
3.Reinstall the two adjustment screws.
Elevating Leg Rests (Optional)
Elevating Leg Rests (ELRs) offer an infinite range of adjustment for the leg angle and a footrest ad- justment range of
To rotate the ELRs:
1.Push in release lever A. See figure 23.
2.Rotate the ELRs.
FOOTREST EXTENSION
SFR RELEASE LEVER
FOOTREST
ADJUSTMENT
SCREWS
Figure 22. Swing-away Footrest Adjustment
RELEASE LEVER A |
RELEASE LEVER B |
LEG REST |
EXTENSION |
LEG REST |
ADJUSTMENT |
SCREWS |
Figure 23. Elevating Leg Rest Adjustment
Jazzy 1170XL | www.pridemobility.com | 25 |