I V . A S S E M B L Y
Power Elevating Seat Option Installation Your power chair may be equipped with a power elevating seat option. While the seat itself may be any one of the styles offered for this model, the way the seat base attaches to the Jazzy 1170XL power base is different.
To install the power seat:
l. Align the seat shaft to the hole in the actuator. See figure 15.
2. Insert the seat shaft into the actuator and push the seat lever forward.
3. Lock the seat into place.
4.Plug the power elevating seat switch cable into the connector on the electronics tray.
5.Plug the controller cable into the connector on the electronics tray. See figure 6.
6.Route the cable to ensure that the cable cannot be pinched in the seat hinge.
7.Secure the controller cable to the armrest receiver
with one or more wire ties.
Figure 15. Power Elevating Seat Actuator
Jazzy 1170XL | www.pridemobility.com | 21 |