V I I I . O P E R A T I O N
REMOTE PLUS CONTROLLER
The Remote Plus is a modular electronic control system. The electronics necessary to operate the power chair are con- tained in several modules located on different parts of your power chair.
The Remote Plus system consists of the following components:
νmaster remote
νcommunications cable(s)
νpower module
νmotor wiring harnesses
νbattery wiring harnesses
νactuator lighting module (for optional equipment)
The master remote is located typically on the end of an armrest. The other components are located inside the power base.
Remote Plus Master Remote
The Remote Plus master remote consists of the following (see figure 23):
1.joystick
2.keypad
3.controller communications cable
4.
Joystick
The joystick controls the direction and speed of your power chair. When you move the joystick from the neutral (cen- ter) position, the electromagnetic brakes release and allow your power chair to move. The further you push the joy- stick from its neutral position, the faster your power chair moves. When you release the joystick and allow it to re- turn to the neutral position, you engage the electromag- netic brakes. This causes your power chair to decelerate and come to a complete stop.
1
2
3
4
Figure 23. Remote Plus Master Remote
WARNING! If your power chair begins to move in an unexpected manner, immediately release the joystick. Unless the joystick is damaged, this action should stop your power chair.
Keypad
The keypad is located directly in front of the joystick. See figure 24. It contains keys that you will use to control your power chair.
On/Off Key
The on/off keys turns the system power on and off.
Jazzy 1101/1121/RevE/Jun03 | www.pridemobility.com | 39 |