Basic Operation Instructions | 15 |
|
|
Speed Keys
There are two keys that control the speed. Press the speed increase key to in- crease the speed. Press the speed decrease key to decrease the speed. The speed setting is displayed on the speed setting indicator. If your power chair was pro- grammed with a drive profile, contact your authorized Pride Provider for more information.
NOTE: We recommend that the first few times you operate your power chair, you set the speed to the slowest setting until you become familiar with your new power chair.
Speed Setting Indicator
The speed setting indicator indicates the current speed of your power chair. The speed setting indicator consists of 16 lights arranged clockwise around the horn key. As the speed of the power chair increases, the number of lights increases. There are five larger LEDs which represent 0%, 20%, 40%, 60%, 80%, and 100% of the power chair’s maximum speed. Press the speed decrease key or speed increase key once to adjust the speed in the five larger increments. Press and hold the the speed decrease key or speed increase key to adjust the speed in individual increments.
NOTE: When the bottom,
Service Indicator
The service indicator displays Dynamic controller error codes. Refer to “Error Codes.”
Attendant Control Indicator (For Optional Equipment)
The attendant control indicator is on when the optionalAttendant Control Unit is activated.
Actuator Select Key with Lights (For Optional Equipment)
If your power chair is equipped with power accessories such as a power seat or power elevating leg rests, you can operate them through the keypad. Refer to “ActuatorAdjustment.”
www.pridemobility.com | Dynamic Controller |