Pride Mobility INFMANU3676 manual Dynamic Controller, Precautionary Guidelines

Basic Operation Instructions 7

DYNAMIC CONTROLLER

The Dynamic controller is a modular electronic controller system that allows you to operate your power chair. It is designed to allow the user to have complete control over chair movement and speed.

The controller is available in both 50-amp and 60-amp configurations, and has been pre-programmed to meet a typical user’s needs. The program is set using either a personal computer with software provided by the controller manufacturer or with a hand-held programmer, also provided by the controller manufacturer.

WARNING! The controller program can affect speed, acceleration, deceleration, dynamic stability, and braking. If it is programmed incorrectly or outside of the safe limits as determined by your healthcare professional, it can create a dangerous situation. Only the power chair manufacturer, an authorized representative of the manufacturer, or a trained service technician should program the controller.

PRECAUTIONARY GUIDELINES

Before operating the Dynamic controller, please read the following.These guidelines are provided for your benefit and will aid you in the safe operation of the controller system.

!Turn off the power to the controller when transferring to or from your power chair.

!Follow all of the procedures and heed the warnings as explained in your power chair owner’s manual.

www.pridemobility.com Dynamic Controller