Pride Mobility INFMANU3676 manual Safety Guidelines

Page 2

SAFETY GUIDELINES

WARNING! An authorized Pride Provider or a qualified technician must perform the initial setup of this product and must perform all of the instructions in this manual.

The symbols below are used throughout this owner's manual and on the controller to identify warnings and important information. It is very important for you to read them and understand them completely.

WARNING! Indicates a potentially hazardous condition/ situation. Failure to follow designated procedures can cause either personal injury, component damage, or malfunction. On the product, this icon is represented as a black symbol on a yellow triangle with a black border.

MANDATORY! These actions should be performed as specified. Failure to perform mandatory actions can cause personal injury and/or equipment damage. On the product, this icon is represented as a white symbol on a blue dot with a white border.

PROHIBITED! These actions are prohibited. These actions should not be performed at any time or in any circumstances. Performing a prohibited action can cause personal injury and/or equipment damage. On the product, this icon is represented as a black symbol with a red circle and a red slash.

NOTE: These instructions are compiled from the latest specifications and product information available at the time of publication. We re- serve the right to make changes as they become necessary. Any changes to our products may cause slight variations between the illustrations and explanations in this manual and the product you have purchased. The latest/current version of this manual is available on our website.

088 609 661

Copyright © 2008

Pride Mobility Products Corporation

INFMANU3676/Rev B/May 2008

Dynamic Controller

www.pridemobility.com

Image 2
Contents Dynamic Controller Safety Guidelines Table of Contents Product Safety Symbols Label InformationInformation Exchange IntroductionPURCHASER’S Agreement My authorized Pride Provider Is Precautionary Guidelines Dynamic ControllerElectromagnetic and Radio Frequency Interference EMI/RFI Dynamic Controller Features Dynamic Controller Components and Connections Operating the Dynamic Controller Joystick ControlDynamic Controller 4-key Keypad Dynamic Controller 8-key Keypad On/off key turns the system on and off Speed Keys OFF-BOARD CHARGER/PROGRAMMING Socket Controller ConnectorLock Mode Actuator Adjustment To unlock the Dynamic controllerError Codes Sleep Mode if EnabledOUT of Neutral AT Power UP Oonapu Care and Maintenance Warranty Error Code Probable Cause Possible SolutionINFMANU3676