Pride Mobility QUANTUM 600E owner manual Heavy Duty Drop-in Leg Rests, Multi-Axis Foot Plates

	V . C O M F O R T A D J U S T M E N T S
Heavy Duty Drop-in Leg Rests
You can adjust the forward/back position, as well as the
length of the heavy duty drop-in leg rests. See figure 21.
To adjust the forward/back position:
1.	Remove the adjustment bolt from each side rail.
2.	Move the leg rest hanger in or out to the desired posi-
	tion.	A
3.	Align the adjustment holes in the leg rest hanger with
		B
	those in the side rail.
4.	Reinstall the adjustment bolts to secure the leg rest hangers.
To adjust the leg rest length:		C
		D
1.	Remove the adjustment screws from the leg rest
	extension.
2.	Slide the leg rest up or down to the desired length.
3.	Align the adjustment holes in the leg rest extension and
	reinstall the adjustment screws.
Multi-Axis Foot Plates		A
The multi-axis foot plate assembly can be installed on either
a swing-away footrest or an elevating leg rest. The multi-
axis foot plate has four adjustments: leg rest length (A), po-
sition (B), tilt (C), and angle (D). See figure 22.
To change leg rest length (A):		B
1.	Remove the hardware.
2.	Move the leg rest to the desired position.
3.	Reinstall the hardware.
To change foot plate position (B):
1.	Remove the hardware.	C
2.	Move the foot plate to the desired position.
3.	Reinstall the hardware.
To change foot plate tilt (C):
1.	Loosen the hardware.
2.	Tilt the foot plate to the desired position.
3.	Tighten the hardware.	D
To change foot plate angle (D):
1.	Turn the setscrew clockwise to decrease the angle.
2.	Turn the setscrew counterclockwise to increase the
	angle.	SETSCREWS
		Figure 22. Multi-Axis Foot Plate (ELR Shown)

28 www.quantumrehab.com Quantum 600E