48 
X I I . M a i n t e n a n c e 
A.NOTES
1.Proper maintenance will improve performance and extend the useful life of your chair.
2.Clean your chair regularly. This will help you find loose or worn parts and will make your chair easier to use.
3.To protect your investment, have all major service and repair work done by your supplier.
1.Your chair needs regular maintenance for peak performance and to avoid injury from chair failure, damage or premature wear.
2.Inspect and maintain this chair strictly per the “Maintenance Chart”. (p. 51)
3.If you detect a problem, make sure to service or repair the chair before use.
4.At least once a year, have a complete safety check and service of your chair performed by a supplier.
B.CLEANING
1.Paint Finish:
•Clean the paint finish with mild soapy water monthly.
•Protect the paint with a coat of
2.Motors:
•Clean around motor area weekly with a slightly damp (not wet) cloth.
•Wipe off or blow away any fluff, dust, or dirt on or around the motors.
•Note: You do not need to grease or oil the chair.
3.Upholstery:
•
•
NOTE– Washing the fabric may decrease fire retardant properties.
C. STORAGE TIPS
1.Store your chair in a clean, dry area. If you fail to do so, parts may rust or corrode.
2.Before using your chair, make sure it is in proper working order. Inspect and service all items on the “Maintenance Chart” (See p. 51)
3.If you store this chair for more than three months, have it inspected by a supplier before use.
X I I . M a i n t e n a n c e 
49
D.BATTERY MAINTENANCE
1.To prevent an acid spill, always keep batteries upright (wet cell batteries).
2.Never smoke or hold an open flame near batteries.
3.Always wear rubber gloves and safety glasses when you handle batteries.
1. Maintenance Schedule:
This varies for different types of batteries. Always follow the instructions supplied with your batteries.
NOTE– Always wear rubber gloves and safety glasses when you handle or service batteries.
2.Adding Water: (Wet Cells Only)
•
NOTE– Use distilled water only.
•Check the battery fluid level about once a week. When you remove the stoppers (on top of the battery) there should be
3.Corrosion:
Check battery terminals often for corrosion.
a. If corrosion is present, use a wire brush to clean the terminals.
NOTE– Always wear safety glasses and rubber gloves.
b. Use baking soda to neutralize acid.
c. Use petroleum jelly to
4. For Answers To Questions: Contact your supplier.
930466 Rev. A | 930466 Rev. A |