Invacare WT 200 Using the Walking Tutor, Removing the Footplate, Fitting the Sling to a Patient

Page 6

Using the Walking Tutor

NOTE: Refer to the warnings and cautions in sling and lift manuals provided with the products before using the walking tutor.

Removing the Footplate

NOTE: For this procedure, refer to FIGURE 5.

1.Lift the footplate up to disengage the “C” brackets from the main frame.

2.Pull the footplate away.

Footplate

Main Frame

“C” Bracket

FIGURE 5 Removing the Footplate

Fitting the Sling to a Patient

WARNING

ALWAYS position a sling low down around the patient's torso.

NOTE: For this procedure, refer to FIGURE 6.

1.Fit the sling to the patient before wheeling the lifter into position to carry out the lift.

2.Lean the patient forward and position the sling around the lower back with the torso band against the patient.

NOTE: The sling should be centered so that equal lengths of the sling extend forward under the arms.

3. Fasten the torso band firmly around the patientʹs chest.

Sling

FIGURE 6 Fitting the Sling to a Patient

Walking Tutor

6

Part No 1141439

Image 6
Contents Walking Tutor Safety SummaryAssembling the Walking Tutor Attaching Strap Assemblies to the BoomRemoving the Boom Bearing Retainer Attaching Strap Assemblies to the BoomAttaching the Walking Tutor to the Lift Removing the Boom Bearing RetainerAssembling the Armrest to Walking Tutor Attaching the Walking Tutor to the LiftAngle Adjusting the ArmrestHeight DepthUsing the Walking Tutor Removing the FootplateFitting the Sling to a Patient Lifting the Patient Positioning the Walking Tutor to Suit the PatientWalking the Patient Product Made Australia