Invacare 1610N operating instructions ADULT/HEMI Removable ARM Wheelchair, Permanent ARM, Rear

Page 1

Solid Seat Installation / Replacement for

Model 1000,Tracer LX,Tracer IV, andTracer EXWheelchairs

Assembly, Installation and Operating Instructions

Model Nos. 1610, 1610P, 1610N, 1610PN

SAVE THESE INSTRUCTIONS

ADULT/HEMI REMOVABLE ARM

WHEELCHAIR

NOTE: Check all parts for shipping damage before using. In case of damage, DO NOT use the equipment. Contact the Dealer/Carrier for further instructions.

SAFETY SUMMARY

The following recommendations are made for safe installation of the Solid Seat.

GENERALWARNINGS

DO NOT install or use this equipment without first reading and understanding these instructions. If you are unable to understand the Warnings, Cau- tions or Instructions, contact a healthcare pro- fessional, dealer or technical personnel before attempting to install this equipment - otherwise, injury or damage may occur.

INSTALLATION WARNING

After ANY adjustments, repair or service and BE- FORE use, make sure that all attaching hard- ware is tightened securely.

Seat Guides

(REAR) and

Tension Springs

Crossbrace

Pivot Nut

Seat Upholstery

Reinsert Two (2)

Screws Here

Seat Guides

(Front of Chair)

Crossbrace

Pivot Bolt

INSTALLING THE SOLID SEAT - MODEL 1000 AND TRACER LX WHEELCHAIRS ONLY (FIGURES 1-5)

NOTE: If not stated specifically, the procedure refers to both Adult/Hemi, Removable, and Permanet Arm Wheelchairs.

1. Remove wheelchair arms.

NOTE: Some wheelchairs may have permanent arms.

2.Fold chair.

3.Remove seat upholstery (All Chairs) and reinsert two

(2) screws behind the front two (2) spacers on the seat rails (Adult/Hemi Removable Arm) (FIGURE 1).

4.Remove the crossbrace pivot bolt and locknut from crossbrace (FIGURE 1).

5.Lift one (1) seat guide (front of chair) up and out of the side frame (Removable arm only) (FIGURE 1).

6.Remove the rear seat guide and tension spring from the seat rail (FIGURE 1).

NOTE: For Permanent Arm Wheelchairs remove seat guides from front and rear of chair (FIGURE 1).

7. Repeat steps 5 and 6 for opposite side frame.

PERMANENT ARM

Seat Guides and

Tension Springs

(REAR)

Crossbrace

Pivot Nut

Seat Guides

(Front)

Crossbrace

Pivot Bolt

FIGURE 1 - DISASSEMBLY OF THE WHEELCHAIR TO

INSTALL SOLID SEAT

1

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Permanent ARM ADULT/HEMI Removable ARM WheelchairSeat Guides Tension Springs RearADULT/HEMI Permanent ARM Wheelchair Rear Adult Removable ARM Wheelchair Rear Spacer LengthHemi Removable ARM Wheelchair Rear 16-18 Nut RearSolid Seat Mounting Screws Braces Front of SeatInstalling the Solid Seat Tracer IV only Figure Right Side StepsInstalling the Solid Seat Tracer EX only Figure Shown Detail aBrace Pivot Screw TapUSA

1610PN, 1610P, 1610N, Tracer LX, 1610 specifications

Invacare has long been recognized as a leader in providing durable medical equipment, and among its noteworthy offerings are the Invacare 1000, 1610, Tracer LX, 1610N, and 1610P wheelchairs. These models are renowned for their combination of comfort, customization, and innovative technology, catering to the diverse needs of users.

The Invacare 1000 wheelchair stands out for its lightweight design and ease of maneuverability, making it an ideal choice for both indoor and outdoor use. Its adjustable seat height allows users to find the perfect fit, ensuring comfort throughout the day. The simplicity of its frame facilitates easy transport, adding to its appeal for users who are always on the go.

The Invacare 1610 wheelchair integrates advanced ergonomic features. This model boasts a sleek, durable frame made from high-strength steel, providing exceptional stability and support. The comfortable padded seat and backrest are designed to enhance user experience, accompanied by footrests that can be easily adjusted. This adaptability makes the Invacare 1610 suitable for various body types, promoting user independence.

The Tracer LX model represents an evolution in wheelchair technology. It features a dual-padded seat and back for added comfort and support. One of the standout features of the Tracer LX is its removable upholstery, which allows for easy cleaning and maintenance. Additionally, it offers a variety of adjustable options, such as armrests and leg supports, enabling personalized comfort.

The Invacare 1610N and 1610P models take customization a step further. The 1610N includes a more contoured and supportive seating option, ideal for users requiring enhanced positioning. Conversely, the 1610P places emphasis on portability, featuring a quick-release folding mechanism that makes it simple to store and transport. Both models share many fundamental characteristics with the standard 1610, ensuring that users don't have to sacrifice quality for customization.

In summary, the Invacare 1000, 1610, Tracer LX, 1610N, and 1610P wheelchairs are exemplary choices for those seeking a balance of comfort, durability, and customization. With their innovative features and versatile designs, these models cater to a wide range of user needs, making them a top choice for individuals seeking mobility solutions. Whether for everyday use or specialized support, Invacare's commitment to quality ensures that users can find the perfect wheelchair to enhance their independence and quality of life.
Top Page Image Contents