Installing the Solid Seat Tracer IV only Figure

Top View

Front of Seat

Spacers

Seat Rails

Spacers

Slide X-Brace Over Seat Rails

FIGURE 5 - ASSEMBLY OF THE FRONT X-BRACE

INSTALLING THE SOLID SEAT - TRACER IV ONLY (FIGURE 6)

NOTE: Refer to the GENERAL WARNINGS in the SAFETY SUMMARY of this Instruction Sheet.

NOTE: Right and Left sides of the wheelchair are de- termined from the occupants position.

NOTE: Take note of orentation and position of seat end caps and hardware for reinstallation.

Solid Seat Ordered On Chair (FIGURE 6)

1.Remove the two (2) tap screws that secure the front solid seat braces to the seat rails.

2.Remove the front solid seat braces from the seat rails. Rotate the front solid seat braces upward and reinstall ontotheseatrailsandsecurewiththetwo(2)tapscrews provided as shown in DETAIL "A" of FIGURE 6.

3.Remove the two (2) bolts and lock nuts that secure the two (2) right solid seat braces to the two (2) left solid seat braces.

4.Secure the solid seat insert to the two (2) left solid seat brackets with the four (4) long mounting screws.

NOTE: When connecting the right and left solid seat brack- ets, tighten the bolts and locknuts enough to minimize play, but still allow the solid seat braces to pivot when fold- ing the wheelchair.

5.Securethetwo(2)leftsolidseatbracestothetwo(2)right solid seat braces with the two (2) bolts and locknuts.

Solid Seat Ordered Off Chair (FIGURE 6)

1.Remove wheelchair arms.

2.Close chair.

3.Remove the ten (10) mounting screws securing the seat upholsteryto the seat rails.

4.Remove the two (2) X-brace pivot screws and lock- nuts from X-brace.

5.Lift one (1) seat rail UP until the two (2) seat guides are clear of the guide tubes.

6.Remove the end cap, rear seat guide and EXISTING spacer. Discard EXISTING spacer.

7.Repeat STEPS 5-6 on remaining seat rail.

8.Slide one (1) NEW short spacer, solid seat brace, rear seat guide, and end cap onto the right seat rail and secure with two (2) tap screw as shown in FIGURE 6.

9.Slide one (1) NEW medium spacer, solid seat brace, rear seat guide, and end cap onto the left seat rail and secure with two (2) tap screw as shown in FIGURE 6.

10.Insert the four (4) seat guides into the four (4) seat guide tubes.

NOTE: Ensure only 1/8-inch of the pivot bolt threads ex- tend beyond the end of the locknut.

11.Reinstall the two (2) X-brace pivot screws and lock- nuts.

12.Slide a long spacer and solid seat brace onto the right side seat rail and secure with tap screw as shown in FIGURE 6.

13.Slide a long spacer and solid seat brace onto the left side seat rail and secure with tap screw as shown in FIGURE 6.

14.Secure the solid seat insert to the two (2) left solid seat brackets with the four (4) long mounting screws.

NOTE: When connecting the right and left solid seat brack- ets, tighten the bolts and locknuts enough to minimize play, but still allow the solid seat braces to pivot when fold- ing the wheelchair.

15.Secure the two (2) left solid seat braces to the two (2) right solid seat braces with the two (2) bolts and lock- nuts.

1610PN, 1610P, 1610N, Tracer LX, 1610 specifications

Invacare has long been recognized as a leader in providing durable medical equipment, and among its noteworthy offerings are the Invacare 1000, 1610, Tracer LX, 1610N, and 1610P wheelchairs. These models are renowned for their combination of comfort, customization, and innovative technology, catering to the diverse needs of users.

The Invacare 1000 wheelchair stands out for its lightweight design and ease of maneuverability, making it an ideal choice for both indoor and outdoor use. Its adjustable seat height allows users to find the perfect fit, ensuring comfort throughout the day. The simplicity of its frame facilitates easy transport, adding to its appeal for users who are always on the go.

The Invacare 1610 wheelchair integrates advanced ergonomic features. This model boasts a sleek, durable frame made from high-strength steel, providing exceptional stability and support. The comfortable padded seat and backrest are designed to enhance user experience, accompanied by footrests that can be easily adjusted. This adaptability makes the Invacare 1610 suitable for various body types, promoting user independence.

The Tracer LX model represents an evolution in wheelchair technology. It features a dual-padded seat and back for added comfort and support. One of the standout features of the Tracer LX is its removable upholstery, which allows for easy cleaning and maintenance. Additionally, it offers a variety of adjustable options, such as armrests and leg supports, enabling personalized comfort.

The Invacare 1610N and 1610P models take customization a step further. The 1610N includes a more contoured and supportive seating option, ideal for users requiring enhanced positioning. Conversely, the 1610P places emphasis on portability, featuring a quick-release folding mechanism that makes it simple to store and transport. Both models share many fundamental characteristics with the standard 1610, ensuring that users don't have to sacrifice quality for customization.

In summary, the Invacare 1000, 1610, Tracer LX, 1610N, and 1610P wheelchairs are exemplary choices for those seeking a balance of comfort, durability, and customization. With their innovative features and versatile designs, these models cater to a wide range of user needs, making them a top choice for individuals seeking mobility solutions. Whether for everyday use or specialized support, Invacare's commitment to quality ensures that users can find the perfect wheelchair to enhance their independence and quality of life.