Panasonic KX-TG2340JX operating instructions Troubleshooting

Models: KX-TG2340JX

1 60
Download 60 pages 46.1 Kb
Page 55
Image 55

PQQX14670ZA.book 55 ページ 2005年2月22日 火曜日 午後12時0分

Troubleshooting

If the handset display shows error messages, see “If the Following Appear on Your Display...” (p. 54) for the Cause & Remedy.

Problem

Cause & Remedy

No link to base. Move closer to base, try again.” is displayed and an alarm tone sounds.

You are too far from the base unit. Walk closer to the base unit.

Confirm the base unit’s AC adaptor is plugged in.

Raise the base unit antenna.

If the above remedies do not solve the problem, the handset may have lost communication with the base unit. Register the handset again (p. 49).

The handset and/or base unit

• Check the settings (p. 8–10).

does not work.

• Check whether the dialing mode setting is

 

correct (p. 14).

 

• Fully charge the battery (p. 9).

 

• Clean the charge contacts and charge again

 

(p. 10).

 

• Check battery Installation (p. 9).

 

• Unplug the base unit’s AC adaptor to reset it.

 

Plug in, and try again.

 

Re-install the battery (p. 9) and fully charge it.

Static, sound cuts in/out, fades. Interference from other electrical units.

Move the handset and base unit away from other electrical appliances (p. 3).

Walk closer to the base unit.

Raise the base unit antenna.

If the unit is connected to a telephone line with DSL service, you may hear noise from the receiver or speaker during conversations. We recommend connecting a noise filter (contact your DSL service provider) to the telephone line between the unit and the telephone line jack.

 

The handset and/or base unit

• The ringer volume is turned off. Set to high,

 

does not ring.

 

medium, or low (p. 16, 17).

 

The handset display is blank.

• If the handset display is blank, fully charge

 

 

 

 

the battery (p. 9).

 

You cannot program any

• Programming is not possible while the

 

function items.

 

handset and/or base unit is being used.

 

 

 

• Do not pause for over 60 seconds while

 

 

 

 

programming.

 

 

 

• Walk closer to the base unit.

 

 

 

• When the Dial Lock is turned on (p. 47), you

 

 

 

 

cannot store the phone number in the phone

 

 

 

 

book.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Useful Information

55

Page 55
Image 55
Panasonic KX-TG2340JX operating instructions Troubleshooting