Panasonic KX-TG2340JX Enter the password set when the Dial Lock, Was turned on, @@@@

PQQX14670ZA.book 48 ページ ２００５年２月２２日 火曜日 午後１２時０分

Special Features

•If the Dial Lock is turned on, the handset displays “Dial lock” while not in use and the DIAL LOCK indicator on the base unit lights. “Dial lock” is not displayed, if the handset is off the base unit when there are missed calls (p. 28).

•If you make a call while the Dial Lock is turned on:

—using the handset, the handset beeps 3 times and “Dial locked” is displayed.

—using the base unit, the base unit beeps 3 times.

•Please write down your password. If you forget your password, consult your nearest Panasonic service center.

To cancel the Dial Lock (use either the handset or the base unit)

Handset

1Press [MENU].

2	Scroll to “Dial lock” by pressing [d] or [B],
		Dial lock
	then press Select.
		KBack dB SelectL
3	Enter the password set when the Dial Lock
		Enter password
	was turned on.	:_ _ _ _
		KBack
4	Press Save.
		Enter password
		:@@@@	SaveL
		KBack

5Press Yes, then press [OFF].

•“Dial lock off” is displayed.

•If you entered the wrong password, the handset beeps 3 times and “Save error” is displayed. Enter the correct password.

Turn Dial lock off?

KBack YesL

Base Unit

1Press [DIAL LOCK].

•The DIAL LOCK indicator flashes.

2Enter the password set when the Dial Lock was turned on.

3Press [DIAL LOCK].

•A long beep sounds and the indicator light goes out.

•If you entered the wrong password, the base unit beeps 3 times. Start again from step 1.

48