Panasonic KX-TG2340JX operating instructions LCD Contrast Handset

PQQX14670ZA.book 19 ページ ２００５年２月２２日 火曜日 午後１２時０分

Programmable Settings

Setting the base unit ringer tone by using the Handset

1Press [MENU].

2	Scroll to “Initial setting” by pressing [d]
		Initial setting
	or [B], then press Select.
		KBack dB SelectL
3	Scroll to “Set base unit” by pressing [d] or
		Set base unit
	[B], then press Select.
		KBack dB SelectL
4	Press Select at “Ringer tone”.
		Ringer tone
		KBack dB SelectL

Preparation

5Select the desired ringer tone by pressing [d] or [B].

•The base unit will ring and the ringer tone will change. If the base unit ringer volume has been turned off, the base unit will not ring (p. 17).

•You can also select the ringer tone by pressing [1] to [7].

Ringer tone 1:Tone 1

KBack dB SaveL

6Press Save, then press [OFF].

LCD Contrast Handset

There are 6 levels of LCD contrast. The factory preset is “level 3”.

1Press [MENU].

2	Scroll to “Initial setting” by pressing [d]
		Initial setting
	or [B], then press Select.
		KBack dB SelectL
3	Press Select at “LCD contrast”.
		LCD contrast
		KBack dB SelectL

4Select the desired contrast by pressing [d] or [B].

• The contrast will change.

Ex. Level 3

LCD contrast

Low High KBack dB SaveL

5Press Save, then press [OFF].

19