Specifications, Safety Instructions | Panasonic KX-TG2340JX guide

PQQX14670ZA.book 59 ページ２００５年２月２２日火曜日午後１２時０分

Safety Instructions

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

If there is any trouble, disconnect the unit from the telephone line and connect a known working phone. If the known working phone operates properly, do not reconnect the unit to the telephone line until the trouble has been repaired. If the known working phone does not operate properly, consult your telephone company.

Specifications

nBase Unit

Power Supply: AC Adaptor (220–240 V AC, 50/60 Hz)

Power Consumption:	Standby: Approx. 2.0 W
	Maximum: Approx. 5.4 W
Frequency:	2.4 GHz – 2.48 GHz
Dimensions (H x W x D):	Approx. 85 mm x 175 mm x 200 mm
Mass (Weight):	Approx. 460 g

nHandset

Power Supply: Ni-MH battery (3.6 V, 830 mAh)

Frequency:	2.4 GHz – 2.48 GHz
Dimensions (H x W x D):	Approx. 208 mm x 52 mm x 39 mm
Mass (Weight):	Approx. 190 g
Security Codes:	1,000,000
n Dialing Mode:	Tone (DTMF)/Pulse

nOperating Environment: 5 °C – 40 °C

Specifications are subject to change without notice.

Useful Information

59

Image 59

Panasonic KX-TG2340JX operating instructions Specifications, Safety Instructions

Contents

Pulse-or-tone dialing capability Charge the battery for 6 hours before initial useDigital Cordless Phone For your future reference Accessories included Base Unit Location/Noise Battery ChargeFor Best Performance Contents Contents Base unit Location of Controls Handset navigator key Location of ControlsHandset Handset soft keys Connections Installation Display prompt Battery strength Installation Installing the Battery in the HandsetBattery strength To replace the battery Recharge InstallationBattery information Battery replacement Programming Guidelines Handset Programmable SettingsHow to select a function item from the menu Main menu Programmable Settings Function Menu Table Handset To confirm the date and time, repeat steps 1 and 2 above Programmable Settings Date and Time Handset Line Mode Handset Programmable Settings Dialing Mode Handset Auto talk Off KBack d B Save L Programmable Settings Auto Talk HandsetScroll to Auto talk by pressing d or B Select On or Off by pressing d or B Ringer volume Low High KBack dB SaveL Programmable Settings Ringer VolumeHandset ringer volume Handset Select the desired volume level by pressing d or B Make sure the base unit is not being used Programmable SettingsBase unit ringer volume Base Unit To turn the ringer on, press Volume or Select the desired ringer tone by pressing d Programmable Settings Ringer ToneHandset ringer tone Handset Scroll to Ringer tone by pressing d or LCD Contrast Handset Setting the base unit ringer tone by using the Handset Hands-free Digital Duplex Speakerphone Using the Handset HandsetMaking Calls To have a hands-free phone conversation To dial after confirming the entered number To adjust the receiver/speaker volume during a conversationTo redial using the redial list Memory Redial Making Calls Backlit LCD display/Lighted handset keypad To put a call on holdVoice Enhancer Technology To return to the call, press SP-PHONE Making Calls Using the Base Unit Base UnitTo adjust the speaker volume during a conversation Press SP-PHONE OFF s Auto Talk Answering CallsBase Unit Talk into the MIC To hang up, press SP-PHONE Display Meaning Caller ID ServiceHow Caller ID information is displayed Private name display Announcing caller information Talking Caller ID Caller ID Service Using Talking Caller ID To turn Talking Caller ID on or off Caller ID ServiceHandset Talking Caller ID feature Handset Base unit Talking Caller ID feature Handset Caller List Using the Caller ListViewing the Caller List Press Rcvd calls, , or To enter If a caller calls more than once Using the Caller ListCalling Back from the Caller List Handset What , means Press Select Press Edit Press Rcvd calls, d, or B to enter the Caller ListScroll to the desired caller by pressing d or Press Select Press Rcvd calls, d, or B to enter To erase all entries Using the Caller List Erasing Caller Information HandsetTo erase a specific caller To store an emergency number Phone BookStoring Names and Numbers Handset For example, to enter Tom If you make a mistake when entering a name or numberPhone Book Selecting characters to enter names Press d repeatedly until the desired name is displayed Phone Book Dialing from the Phone Book HandsetPress Search To search for a name by initial Search for the desired item by pressing d or Chain Dial HandsetIndex table While you are on a call Press Menu Erasing an Item in the Phone Book Handset Phone Book Editing an Item in the Phone Book Handset From Base Unit IntercomMaking Intercom Calls From Handset Call from Base Intercom Answering Intercom CallsPress C, s or HOLD/INTERCOM Press SP-PHONE or LOCATOR/INTERCOM Press SP-PHONE or LOCATOR/INTERCOM to answer Transferring a CallFrom the Handset to the Base Unit From the Base Unit to the Handset Quick call transfer Transferring a Call During a call, press LOCATOR/INTERCOM Conference CallsTo join a conversation Call Share Muting Your Conversation Special FeaturesFor Call Waiting Service Users Temporary Tone Dialing Selecting the flash time Handset Special Features Using the Pause KeyFor PBX Line/Long Distance Calls Handset Flash Button Handset Base Unit Scroll to Incoming call. by pressing d Special Features Incoming Call Tone Handset Base UnitHandset incoming call tone Handset Base unit incoming call tone Handset Key tone KBack d B Save L Special Features Key Tone HandsetScroll to Key tone by pressing d or B Select Off or On by pressing d or B Press Dial Lock Special FeaturesDial Lock Handset Base Unit @@@@ Enter the password set when the Dial LockEnter the password set when the Dial Lock was turned on Was turned on Handset 1 Registered Press and hold LOCATOR/INTERCOM until a beep sounds To attach the shoulder rest attachment Belt ClipShoulder Rest Attachment To attach the belt clip To remove the belt clip Wall Template Wall Mounting Optional Headset Connecting the optional headsetTo switch to the speakerphone while using the headset During programming Direct CommandsMenu item Command Selection items Display message Cause & Remedy If the Following Appear on Your Display Troubleshooting Problem Cause & Remedy Troubleshooting But Recharge battery is Recharge battery is Safety Instructions Safety Instructions Specifications PQQX14670ZA F0205-0D 62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, Japan