Panasonic KX-TG2340JX operating instructions Wall Mounting, Wall Template

PQQX14670ZA.book 51 ページ ２００５年２月２２日 火曜日 午後１２時０分

Wall Mounting

This unit can be mounted on a wall.

1Push the hook and turn it upward. Turn the hook until a click is heard.

2Press the tabs in the direction of the arrows (1), then remove the wall mounting adaptor (2).

2

1 1

3Connect the AC adaptor. Tuck the telephone line cord inside the wall mounting adaptor, then push the adaptor in the direction of the arrows (1 and 2).

•The word “UP WALL” should face upward.

•Fasten the AC adaptor cord to prevent it from being disconnected.

Hook

2 1

To Power Outlet

Wall Template

4Install screws using the wall template below. Connect the telephone line cord. Mount the unit, then slide it down.

• Raise the antenna.

Screws

(not included)

8.3 cm

To Single-Line

Telephone Jack

5To charge the handset battery: Rest the handset on the charge contacts (1), then push the top of the handset so the hook snaps into the slot at the top of the handset (2).

•The unit beeps once and the CHARGE indicator lights.

Slot Hook

	2	Useful
OR	1
		Information
8.3 cm		51