Panasonic KX-TG2340JX Programmable Settings Ringer Tone, Handset ringer tone Handset, Or B

PQQX14670ZA.book 18 ページ ２００５年２月２２日 火曜日 午後１２時０分

Programmable Settings

Ringer Tone

You can set the handset and base unit ringers to use one of 7 ringer patterns for outside calls. “Tone 1” to “Tone 3” are bell ringer patterns. “Melody 1” to “Melody 4” are melody patterns. The factory preset is “Tone 1”.

•You cannot change the ringer tone for intercom calls.

•If you select one of the melody ringer patterns, the ringer will continue to sound for several seconds if:

—the caller hangs up before you answer the call, or

—another person answers the call using another phone connected on the same line.

Handset ringer tone Handset

1Press [MENU].

2	Press Select at “Ringer setting”.
		Ringer setting
		KBack dB SelectL
3	Scroll to “Ringer tone” by pressing [d] or
		Ringer tone
	[B], then press Select.
		KBack dB SelectL
4	Select the desired ringer tone by pressing [d]
		Ringer tone
	or [B].	1:Tone 1
	• The handset will ring and the ringer tone will	KBack dB SaveL

change. If the ringer volume has been turned off, the handset will not ring (p. 16).

• You can also select the ringer tone by pressing [1] to [7].

5Press Save, then press [OFF].

Base unit ringer tone

(use either the handset or the base unit) Base Unit

Make sure the base unit is not being used.

Press VOLUME [<] or [>], then select the desired ringer tone by pressing

[1]to [7].

[1] to [3] : Bell ringer patterns [4] to [7] : Melody patterns

•After pressing VOLUME [<] or [>], the base unit will ring using the current ringer tone.

•The base unit will ring and the ringer tone will change.

•To stop ringing, press [0].

18