Panasonic KX-TG2340JX Programmable Settings Dialing Mode Handset, Line Mode Handset

PQQX14670ZA.book 14 ページ ２００５年２月２２日 火曜日 午後１２時０分

Programmable Settings

Dialing Mode Handset

If you have touch tone service, set the dialing mode to “Tone”. For rotary or pulse service, set to “Pulse”. The factory preset is “Tone”.

1Press [MENU].

2	Scroll to “Initial setting” by pressing [d]
		Initial setting
	or [B], then press Select.
		KBack dB SelectL
3	Scroll to “Set tel line” by pressing [d] or
		Set tel line
	[B], then press Select.
		KBack dB SelectL
4	Press Select at “Set dial mode”.
		Set dial mode
		KBack dB SelectL
5	Select “Pulse” or “Tone” by pressing [d] or
		Set dial mode
	[B].	:Tone
		KBack dB SaveL

6Press Save, then press [OFF].

Line Mode Handset

The line mode is preset to “B” and generally should not be adjusted. If “Line in use” on the handset is not displayed properly or the IN USE indicator on the base unit does not light properly, the line mode selection is incorrect. Set line mode to “A”.

1Press [MENU].

2	Scroll to “Initial setting” by pressing [d]
		Initial setting
	or [B], then press Select.
		KBack dB SelectL
3	Scroll to “Set tel line” by pressing [d] or
		Set tel line
	[B], then press Select.
		KBack dB SelectL
4	Scroll to “Set line mode” by pressing [d] or
		Set line mode
	[B], then press Select.
		KBack dB SelectL
5	Select “A” or “B” by pressing [d] or [B].
		Set line mode
		:B
		KBack dB SaveL

6Press Save, then press [OFF].

14