Panasonic AJ-SD755 operating instructions Setup menus, USER menu, Video

Setup menus

USER menu		<VIDEO>
No./Item		Description
600	This selects the internal reference signal.
INT SG	0001	BB :
	The black burst is generated.
	0002	CB100 :
	100% color bars are generated.
	0003	CB75 :
	75% color bars are generated.
601	This selects whether to float the vertical sync
	position of the video output in order to align
OUT VSYNC	the video output phase with the input in the
	EE/record/edit modes.
	0000	N-VF :Signals are not floated.
	0001	VF : Signals are floated.
602	This selects whether to mute the video output
	signals when a blank on the tape has been
V-MUTE SEL	detected during playback.
	0000	N-MUTE :No muting. (Freeze)
	0001	LOW RF : Muting. (Set to gray.)
603	This selects ON or OFF for the closed caption
	signal of the first field.
CC (F1)
BLANK	0000	BLANK : Signal is forcibly blanked.
	0001	THRU : Signal is not blanked.
604	This selects ON or OFF for the closed caption
	signal of the second field.
CC (F2)
BLANK	0000	BLANK : Signal is forcibly blanked.
	0001	THRU : Signal is not blanked.
605	This selects the freeze mode for still pictures.
FREEZE SEL	0000	FIELD : Field freeze.
	0001	FRAME : Frame freeze.
	<Note>
	When frame freeze has been selected, the frame
	slow status is established with the slow setting.
606	This selects chroma color killer processing
	for the video output signals.
OUT C KILL
	0000	B/W : No color signals are output.
	0001	COLOR : Color signals are output.
609	This selects whether to superimpose EDH
	onto the SDI output signals.
EDH
	0000	OFF : EDH is not superimposed.
	0001	ON : EDH is superimposed.
	<Notes>
	OEven when ON is selected for this setting, EDH
	is not superimposed onto the signals output
	from the SDI OUT 3 connector if the SUPER
	switch on the front panel of the unit is set to
	ON.
	OWhen no optional board (AJ-YA755G) has
	been installed, setup menu No. 609 is not
	displayed.

The underlined items indicates the initial setting.

No./Item		Description
610	This selects the analog component input
	level.
PB/PR IN LV
	0000	M II : M II level
	0001	B-CAM :ß-CAM level
611	This selects Y/C separation processing for
	the composite input signals.
YC SEP MODE
	0000	B/W :
	The signals are processed as B/W signals.
	0001	AUTO :
	The signals are automatically detected.
614	This selects the analog component output
	level.
PB/PR OUT LV
	0000	M II : M II level
	0001	B-CAM :ß-CAM level
618	This selects the interpolation operation.
	Vertical interpolation is conducted automatically
INTERPOLATE	during slow-motion playback to reduce the
	vertical movement of the playback pictures.
	However, this menu item enables the
	interpolation operation to be forcibly turned off.
	0000	OFF :
	Interpolation is forcibly turned off.
	0001	AUTO :
	Interpolation is automatically turned on during
	slow-motion playback.
620	This selects the operation mode for edge
	subcarrier reduction (ESR) in the playback
ESR MODE	circuit.
	0000	OFF :
	The mode is forcibly set to OFF.
	0001	AUTO :
	The mode is automatically set to ON or OFF
	depending on the VTR operation.
621	This selects the cross color processing
	during playback.
CCR MODE
	0000	OFF :
	The cross color is output with no changes
	made.
	0001	ON :
	The cross color can be reduced.

45