Panasonic AJ-SD755 operating instructions Edit, Setup menus, USER menu

Setup menus

USER menu		<EDIT>
No./Item		Description
301	This selects the operation to be performed
	when an edit point has been set incorrectly
IN/OUT DEL	(when the OUT point is before the IN point).
	0000	MANU :
	Editing is not executed unless the illegal edit
	point is cleared or set again properly.
	0001	AUTO :
	The edit points already input are automatically
	cleared.
303	This selects STD or NON-STD in accordance
	with the composite input signal.
STD/
NON-STD	0000	AUTO :
	Standard/non-standard		signals	are
	automatically identified and processed.
	0001	STD :
	Standard signals are processed. (Forced STD)
	0002	N-STD :
	Non-standard signals are processed. (Forced
	NON-STD)
	<Note>
	Use the non-standard (N-STD) setting when
	video or audio trouble occurs with signals from
	laser discs or a satellite.
304	This selects the video signal processing.
SERVO REF	0000	AUTO :
	Servo is synchronized with the input signal
	during recording and editing, or with the REF
	signal during playback.
	0001	EXT :
	Servo is synchronized at all times with the REF
	signal.
305	This sets the channel assignments for the
	controller’s analog audio preset when editing
EDIT RPLCE1	the digital audio of the VTR using a controller
	which does not have a digital audio edit
	preset control function.
	This selects the channel concerned when the
	VTR CH1 edit preset is set in compliance with
	the ON or OFF presetting for the analog audio
	signals designated by the controller.
	0000	N-DEF :
	Not set.
	0001	CH1 :
	Compliance with analog CH1 edit preset.
	0002	CH2 :
	Compliance with analog CH2 edit preset.
	0003	CH1+2 :
	Compliance with either analog CH1 or CH2
	edit preset.

The underlined items indicates the initial setting.

No./Item		Description
306	The same type of setting as setup menu No.
	305. This selects the channel concerned when
EDIT RPLCE2	the CH2 edit preset is set in compliance with
	the ON or OFF presetting for the analog audio
	signals designated by the controller.
	0000	N-DEF :
	Not set.
	0001	CH1 :
	Compliance with analog CH1 edit preset.
	0002	CH2 :
	Compliance with analog CH2 edit preset.
	0003	CH1+2 :
	Compliance with either analog CH1 or CH2
	edit preset.
309	The same type of setting as setup menu No.
	305. This selects the channel concerned when
EDIT RPLCEC	the CUE edit preset is set in compliance with
	the ON or OFF presetting for the analog audio
	signals designated by the controller.
	0000	N-DEF :
	Not set.
	0001	CH1 :
	Compliance with analog CH1 edit preset.
	0002	CH2 :
	Compliance with analog CH2 edit preset.
	0003	CH1+2 :
	Compliance with either analog CH1 or CH2
	edit preset.
310	This selects whether to conduct simultaneous
	playback while editing is in progress.
CONFI EDIT
	0000	OFF : No simultaneous playback
	0001	ON : Simultaneous playback
	<Note>
	Simultaneous playback is valid when the MODE
	switch is set to TAPE.

40