Panasonic AJ-SD755 operating instructions Setup menus, USER menu, Edit

Setup menus

USER menu		<EDIT>
No./Item			Description
311	This selects the connection method for the
	digital audio edit IN point.
AUD EDIT IN
	0000	CUT : Cut processing
	0001	FADE : V Fade processing
312	This selects the connection method for the
	digital audio edit OUT point.
AUD EDIT
OUT	0000	CUT : Cut processing
	0001	FADE : V Fade processing
313	This selects whether the IN point is to be
	entered using the PREROLL button when it
AUTO ENTRY	has not been entered.
	0000	DIS : IN point is not entered.
	0001	ENA : IN point is entered.
314	This selects the CF adjustment deck with
	deck-to-deck editing.
CF ADJ SEL
	0000 PLAYER :
	The player’s edit IN/OUT points are adjusted.
	(reference as the RECORDER side)
	0001 RECORD :
	The recorder’s edit IN/OUT points are
	adjusted. (reference as the PLAYER side)
315	This selects the mode after cue-up operation
	is complete.
AFTER
CUE-UP	0000	STOP : STOP mode
	0001	STILL : SHTL STILL mode
	0002	STILL2 : SLOW STILL mode
320	This sets the maximum SLOW FWD speed.
VAR FWD	0000	+4.1 : +4.1 (+3.1)a speed
MAX	0001	+1.85 : +1.85a speed
	0002	+1 : +1a speed
	<Notes>
	OThe value for the DV/DVCAM tape is shown in
	parenthesis (		).
	OAt any speed setting other than +4.1, the
	phase cannot be synchronized from the editing
	controller.
321	This sets the maximum SLOW REV speed.
VAR REV MAX	0000	–4.1 :–4.1 (–3.1)aspeed
	0001	–1.85 :–1.85aspeed
	0002	–1 :–1aspeed
	0003	–0.43 :–0.43aspeed
	<Note>
	The value for the DV/DVCAM tape is shown in
	parenthesis (		).

The underlined items indicates the initial setting.

No./Item				Description
323	This sets the maximum JOG FWD speed.
JOG FWD	0000	+4.1	: +4.1 (+3.1)a speed
MAX	0001	+1.85	: +1.85a speed
	0002	+1	: +1a speed
	<Notes>
	OThe value for the DV/DVCAM tape is shown in
	parenthesis (			).
	OThe maximum speed is set to +1a when the
	dial on the front panel is operated.
	OAt any speed setting other than +4.1, the
	phase cannot be synchronized from an editing
	controller which synchronizes the phase using
	the JOG command.
324	This sets the maximum JOG REV speed.
JOG REV MAX	0000	–4.1	: –4.1 (–3.1)aspeed
	0001	–1.85	: –1.85aspeed
	0002	–1	: –1aspeed
	0003	–0.43	: –0.43 (–0.5)aspeed
	<Notes>
	OThe value for the DV/DVCAM tape is shown in
	parenthesis (			).
	OThe maximum speed is set to –1awhen the
	dial on the front panel is operated.
325	This sets the postroll time.
	Any time from 0 to 5 seconds can be set in 1-
POSTROLL	second units.
TM
	0000	0s
	0001	1s
	0002	2s
	0003	3s
	0004	4s
	0005	5s

41