Setup menus
USER menu <AUDIO>
No./Item |
| Description |
|
| |
|
| |
728 | This selects whether to superimpose the | |
| audio data onto the SDI output. | |
EMBEDDED |
|
|
AUD | 0000 | OFF : Data is not superimposed. |
| 0001 | ON : Data is superimposed. |
| <Note> | |
| When no optional board | |
| installed, setup menu No. 728 is not displayed. | |
|
| |
731 | This selects whether or not the cue signal is | |
| to be output to the main line output in the | |
CUE OUT SEL | search mode. | |
| 0000 | OFF : CUE is not output. |
| 0001 | ON : CUE is output. |
| <Notes> | |
| OThis function works only when a setting | |
| other than MANU has been selected by | |
| setup menu No. 721 (MONI CH SEL). | |
| OThe main signal system output channels | |
| used for the CUE output differ depending on | |
| the setting selected by setup menu No. 735 | |
| (MON AUTO SEL). | |
| When L/R is selected: | |
|
| CUE is output to CH1 and CH4. |
| When L is selected: | |
|
| CUE is output to CH1. |
| When R is selected: | |
|
| CUE is output to CH2. |
| OWhen PCM has been selected as the setup | |
| menu No. 721 (MONI CH SEL) setting, PCM | |
| is output. | |
|
|
|
The underlined items indicates the initial setting.
<Concerning the CUE output in the search mode>
No./Item |
| Description | ||
|
|
| ||
|
|
| ||
733 | This selects the timing for the output picture and | |||
| CUE output when CUE has been selected for | |||
CUE OUT | monitor output. | |||
| 0000 | NORMAL : The timing is aligned with the | ||
|
| output picture. | ||
| 0001 | DIRECT : Whatever has been recorded on | ||
|
| the tape is output with no delay. | ||
| <Note> | |||
| When DIRECT has been selected, the timing of the | |||
| output picture and that of the cue output are not | |||
| aligned properly. | |||
|
| |||
734 | This selects whether the operation of the | |||
| MONITOR SELECT button on the front panel is to | |||
MONI SEL INH | be enabled or disabled. | |||
| 0000 | OFF : Operation is enabled. | ||
| 0001 | ON : Operation is disabled. | ||
| 0002 | ON1 : | ||
| Operation is disabled in the FULL display mode | |||
| and enabled only in the FINE display mode. | |||
|
|
| ||
735 | Although CUE is automatically output to the | |||
| monitor output in accordance with the operation | |||
MON AUTO | mode when a setting AUTO has been selected by | |||
SEL | setup menu item No. 721 (MONI CH SEL), the | |||
MON AUTO SEL setup menu item is used to | ||||
| ||||
| select the monitor channel which is to be | |||
| automatically switched to CUE. | |||
| 0000 | L/R : | ||
| CUE is output to both the left and right channels. | |||
| 0001 | L : | ||
| CUE is output to the left channel only. | |||
| 0002 | R : | ||
| CUE is output to the right channel only. | |||
|
|
|
| |
The table below shows how the CUE output to the monitor and main signal system outputs differs according to how the setup menu item (No. 721, No. 731 and No. 735) settings are combined.
731 | 721 | 735 | Monitor output | Main signal system output | |||
CUE OUT | MONI CH | MON AUTO |
|
|
|
| |
SEL | SEL | SEL | Lch | Rch | CH1 | CH2 | |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| |
| MANU | PCM 21 | PCM 21 |
|
| ||
|
|
|
|
|
|
| |
|
| L/R | CUE | CUE | PCM 21 | PCM 21 | |
|
|
|
|
| |||
OFF | AUTO | L | CUE | PCM 21 | |||
|
| ||||||
|
|
|
|
|
|
| |
|
| R | PCM 21 | CUE |
|
| |
|
|
|
|
|
|
| |
| PCM | PCM 22 | PCM 22 | PCM 22 | PCM 22 | ||
|
|
|
|
|
|
| |
| MANU | PCM 21 | PCM 21 | PCM 21 | PCM 21 | ||
|
|
|
|
|
|
| |
|
| L/R | CUE | CUE | CUE | CUE | |
|
|
|
|
|
|
| |
ON | AUTO | L | CUE | PCM 21 | CUE | PCM 21 | |
|
|
|
|
|
|
| |
|
| R | PCM 21 | CUE | PCM 21 | CUE | |
|
|
|
|
|
|
| |
| PCM | PCM 22 | PCM 22 | PCM 22 | PCM 22 | ||
|
|
|
|
|
|
| |
<Notes>
21: PCM audio signal output is muted when the VTR is played outside the
22: PCM audio signal output is muted when the VTR is played outside the
When either AUTO is selected, the PCM audio signal is output within
49
