Panasonic KX-TG2340JX operating instructions Installation, Connections

PQQX14670ZA.book 8 ページ ２００５年２月２２日 火曜日 午後１２時０分

Installation

Connections

Fasten the cords.

Hooks

Telephone

Line Cord

To Single-Line Telephone Jack

*Noise Filter (For DSL users)

To Power Outlet

(AC 220–240 V,

50/60 Hz)

AC Adaptor

•USE ONLY WITH Panasonic AC ADAPTOR PQLV1BX.

•The AC adaptor must remain connected at all times. (It is normal for the adaptor to feel warm during use.)

•If your unit is connected to a PBX which does not support Caller ID, you cannot access Caller ID services.

•The unit will not work during a power failure. We recommend connecting a standard telephone to the same telephone line or to the same telephone jack using a T-adaptor.

•When more than one unit is used, the units may interfere with each other. To prevent or reduce interference, please keep ample space between the base units.

*If the unit is connected to a telephone line with DSL service, you may hear noise from the receiver or speaker during conversations or the unit may not display caller’s phone number properly. We recommend connecting a noise filter (contact your DSL service provider) to the telephone line between the unit and the telephone line jack.

8