Panasonic KX-TG2340JX Making Intercom Calls, From Handset, From Base Unit

PQQX14670ZA.book 38 ページ ２００５年２月２２日 火曜日 午後１２時０分

Intercom

Intercom calls can be made between the handset and the base unit.

Making Intercom Calls

From Handset

1Press [HOLD/INTERCOM].

•The base unit will ring for 1 minute.

•To stop paging, press [OFF].

Calling Base

2When the paged party answers, start talking.

•You can switch to the speaker by pressing [s]. To switch back to the receiver, press [C].

Intercom 00-00-05

MuteL

3To disconnect the intercom, press [OFF].

From Base Unit

Using this feature, you can also locate a misplaced handset.

1Press [LOCATOR/INTERCOM].

•The SP-PHONE indicator lights.

•The handset will ring for 1 minute.

•To stop paging, press [SP-PHONE] or [LOCATOR/INTERCOM].

2When the paged party answers, talk into the MIC.

3To disconnect the intercom, press [SP-PHONE]or [LOCATOR/INTERCOM].

•The indicator light goes out.

During an intercom call:

•If you have difficulty hearing while using the handset speakerphone and base unit speaker, decrease the speaker volume by pressing VOLUME [<] on the base unit or [d] on the handset.

•If an incoming call is being received, you will hear two tones (incoming call tone, page 45) and the IN USE indicator will flash rapidly on the base unit. To answer the call;

—if using the handset, press [OFF], then [C] or [s].

—if using the base unit, press [SP-PHONE] twice.

38