Invacare Pronto M71 Inspect/Adjust Weekly, Inspect/Adjust Monthly, Inspect/Adjust Periodically

Page 24

SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING

Inspect/Adjust Weekly

❑Ensure the seat is secured to wheelchair frame.

❑Ensure the seat and/or back upholstery have no rips and DO NOT sag. Replace if necessary.

❑Ensure the seat release latch is not worn and is functional. Replace if necessary.

❑Ensure the inspect tires for flat spots and wear.

❑Ensure the arm pivot points are not worn and/or loose. Replace if necessary.

❑Ensure the inspect and clean the stability lock gears. Replace if worn.

❑Ensure that casters are free of debris.

Inspect/Adjust Monthly

❑Ensure the wheel mounting nuts are secure on drive wheels.

❑Ensure the no excessive side movement or binding when drive wheels are lifted and spun when disengaged (free-wheeling).

❑Ensure the wheel/fork assembly has proper tension when caster is spun. Caster should come to a gradual stop.

CAUTION

As with any vehicle, wheels and tires should be checked periodically for cracks and wear and should be replaced as necessary.

❑Ensure the loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.

❑Ensure all caster/wheel/fork/headtube fasteners are secure.

❑Inspect for any loose hardware on the wheelchair.

❑Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary.

❑Ensure that casters are free of debris.

Inspect/Adjust Periodically

❑Ensure the wheelchair rolls straight (no excessive drag or pull to one side).

❑Ensure the arms are secure but easy to release and adjustment levers engage properly (on ASBA only).

❑Ensure the adjustable height arms operate and lock securely.

❑Ensure the arm pivot points are not worn and/or loose. Replace if necessary.

❑Ensure the armrest pads sit flush against arm tubes.

❑Ensure the seat and/or back upholstery have no rips and DO NOT sag. Replace if necessary.

Pronto® M94™

24

Part No. 1122145

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Pronto M94 Dealer This manual Must be given to the user of the productReference Documents Reference DocumentsManual Part Number Table of Contents Wheelchair Operation ArmsFootboard Assembly SeatFront Riggings Limited Warranty Register Your ProductSHROUD/WHEELS BatteriesSignal Word Meaning Special NotesWheelchair TIE-DOWN Restraints and Seat Restraints Special Notes Label Locations Typical Product Parameters InchController Settings/Repair or Service General GuidelinesOperation Information General Guidelines Accessories BatteriesCharging Batteries Weight Training Weight LimitationGrounding Instructions Rain TestEMI Information EMI InformationEMI Information SAFETY/HANDLING of Wheelchairs Stability and BalanceCoping With Everyday Obstacles Lifting/Stairways Rear Forks Front Forks Transferring to and From Other Seats Reaching, Leaning and Bending ForwardReaching and Bending Backward Reaching, Leaning and Bending ForwardSafety INSPECTION/ Troubleshooting Safety Inspection ChecklistsInspect/Adjust Initially Inspect/Adjust Weekly Inspect/Adjust MonthlyInspect/Adjust Periodically Troubleshooting Mechanical Troubleshooting ElectricalSolutions SPJ+, SPJ+ w/PSS or SPJ+ w/ACC JoysticksNumber Error Code Possible Solution Display Description DefinitionSymptom Probable Cause Solutions MPJ+, PSR+, PSF+ Joysticks or DisplaysDealer/Invacare for Service Checking Battery Charge Level DON’TTurning the Power On/Off Wheelchair OperationOperating the Wheelchair Joystick ActionUsing the Joystick to Drive the Wheelchair Movement ActionOn/Off Button SpeedometerService Indicator Speed Control ButtonsJoystick Charger/Programming InputMPJ+ Joystick Switches and Indicators Drive Select Toggle SwitchInformation Gauge Display Speed Control LCD Display ScreensLCD Display LCD Display Screens Driving Programmable Mono Port 1/2 or External Mode Switch IconRemote On/Off Switch Mode SwitchMemory Card Slot Preparing the Joystick for Use Repositioning the JoystickAsba Seat Model Van Seat Model 10 Repositioning the Joystick Asba Seat ModelDisconnecting/Connecting the Joysticks SPJ+ Joysticks13 Disconnecting/Connecting the Joysticks MPJ+ Joysticks MPJ+ JoysticksInstalling/Removing Flip Back Armrests InstallingArms RemovingAdjusting Flip Back Armrests AdjustingPositioning Flip Back Armrests for User Transfer Positioning Flip Back Armrests for UseAdjusting Van Seat Armrests AngleHeight Adjusting Van Seat Armrests Adjusting the Headrest Adjusting the Back AngleSeat Adjustable Seat Back Angle Asba Model Removing/Installing the Seat Assembly Adjusting the Seat Height Adjusting Seat Position on Seat Frame Asba ModelAdjusting Seat Depth Van Seat Only Do not UseAdjusting Seat Depth Van Seat Only Replacing the Seat Positioning StrapReplacing the Seat Positioning Strap Asba Model Footboard Assembly Removing/Installing the Footboard AssemblyAdjusting the Footboard Assembly Removing/Installing the Footboard AssemblyAdjusting the Footboard Assembly Depth DepthInstalling/Removing Front Riggings Front RiggingsAdjusting Footrest Height Model PHWH93Model PH904A and PHAL4A Replacing Heel Loops Raising/Lowering Elevating Front RiggingsFront Riggings Adjusting/Replacing Telescoping Front Rigging Supports Asba Standard Position Inch OUT Inches OUTAdjusting/Replacing Telescoping Front Rigging Supports Asba Removing/Installing the Shrouds SHROUD/WHEELSReplacing the Flat Free Tires on the Wheel Rim Removing/Installing the Shrouds Engaging/Disengaging Motor Release LeverReplacing Front/Rear Caster Assemblies Engaging/Disengaging Motor Release LeverAdjusting Forks Adjusting ForksBatteries Installing/Removing the Batteries Tool QTY CommentsInstalling/Removing the Batteries Connecting/Disconnecting the Battery Wiring Harness Connecting DisconnectingConnecting/Disconnecting the Battery Wiring Harness Charging BatteriesWhen to Charge Batteries SPJ+ JoysticksBattery Charger Operation On-Board Battery ChargerMPJ+ Joystick Charging Indicator Status YellowIndependent Charger Independent ChargerBatteries Limited Warranty USA

Pronto M71 specifications

The Invacare Pronto M71 is a state-of-the-art power wheelchair designed for users seeking enhanced mobility and independence. Known for its compact design, the Pronto M71 is versatile enough for both indoor and outdoor use, making it an ideal choice for individuals with varying mobility needs.

One of the standout features of the Pronto M71 is its advanced SureStep technology. This innovative system allows the wheelchair to navigate over obstacles and transitions smoothly, ensuring users can move confidently across uneven surfaces. The SureStep system features a unique suspension mechanism that helps maintain stability and control, which is particularly beneficial when negotiating ramps or curbs.

The Pronto M71 is powered by a robust drivetrain comprised of strong motors that provide reliable performance. It is equipped with dual motors that enhance maneuverability, allowing the chair to turn on a dime and navigate tight spaces with ease. The wheelchair's rear-wheel drive design further contributes to its stability and straight-line tracking, giving users a sense of security during transit.

Comfort is a top priority for Invacare, and the Pronto M71 is no exception. The chair features adjustable seating systems, providing users with the option to customize their seating to fit their specific needs. This includes adjustable armrests, seat depth, and back height, ensuring maximum comfort for users during extended periods of use.

In terms of safety, the Pronto M71 is designed with thoughtful features that prioritize user protection. The chair comes with anti-tip technology, ensuring stability when navigating slopes or uneven terrain. Additionally, powerful brakes provide dependable stopping performance, giving users confidence in their mobility.

Another notable characteristic of the Pronto M71 is its user-friendly controls. The joystick controller is intuitive and easy to operate, allowing for effortless navigation. The buttons are designed for simplicity, making it accessible for users of all ages and abilities.

The Pronto M71 also supports various accessories, including trays, cup holders, and custom seating, making it a highly adaptable solution to meet individual user preferences.

Overall, the Invacare Pronto M71 power wheelchair is a remarkable blend of technology, comfort, and safety. Whether users are navigating their home or exploring the outdoors, the Pronto M71 offers the performance and reliability needed to enjoy an active and independent lifestyle. Its innovative features and focus on user experience make it a top choice in the market for power wheelchairs.
Top Page Image Contents