Invacare Pronto M71 manual Checking Battery Charge Level, Don’T

Page 29

SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING

Checking Battery Charge Level

The following “Do’s” and “Don’ts” are provided for your convenience and safety.

DON’T

DO

 

 

Don’t perform any installation or maintenance

Read and understand this manual and any service informa-

without first reading this manual.

tion that accompanies a battery and charger before operat-

 

ing the wheelchair.

 

 

Don’t perform installation or maintenance of bat-

Move the wheelchair to a work area before cleaning termi-

teries in an area that could be damaged by bat-

nals, or opening battery box.

tery spills.

 

 

 

Don’t make it a habit to discharge batteries to

Recharge as frequently as possible to maintain a high charge

the lowest level.

level and extend battery life.

 

 

Don’t use randomly chosen batteries or chargers.

Follow recommendations in this manual when selecting a

 

battery or charger.

 

 

Don’t put new batteries into service before

Fully charge a new battery before using.

charging.

 

 

 

Don’t tip or tilt batteries.

Use a carrying strap to remove, move or install a battery.

 

 

Don’t tap on clamps and terminals with tools.

Push battery clamps on the terminals. Spread clamps wider if

 

necessary.

 

 

Don’t mismatch your battery and chargers.

Use only a GEL charger for a GEL battery.

 

 

Part No. 1122145

29

Pronto® M94™

Image 29
Contents Dealer This manual Must be given to the user of the product Pronto M94Manual Part Number Reference DocumentsReference Documents Table of Contents Arms Wheelchair OperationFront Riggings Footboard AssemblySeat Register Your Product Limited WarrantySHROUD/WHEELS BatteriesWheelchair TIE-DOWN Restraints and Seat Restraints Signal Word MeaningSpecial Notes Special Notes Label Locations Inch Typical Product ParametersOperation Information Controller Settings/Repair or ServiceGeneral Guidelines General Guidelines Charging Batteries AccessoriesBatteries Weight Limitation Weight TrainingGrounding Instructions Rain TestEMI Information EMI InformationEMI Information Stability and Balance SAFETY/HANDLING of WheelchairsCoping With Everyday Obstacles Lifting/Stairways Rear Forks Front Forks Reaching, Leaning and Bending Forward Transferring to and From Other SeatsReaching, Leaning and Bending Forward Reaching and Bending BackwardInspect/Adjust Initially Safety INSPECTION/ TroubleshootingSafety Inspection Checklists Inspect/Adjust Periodically Inspect/Adjust WeeklyInspect/Adjust Monthly Troubleshooting Electrical Troubleshooting MechanicalSolutions SPJ+, SPJ+ w/PSS or SPJ+ w/ACC JoysticksDisplay Description Definition Number Error Code Possible SolutionMPJ+, PSR+, PSF+ Joysticks or Displays Symptom Probable Cause SolutionsDealer/Invacare for Service DON’T Checking Battery Charge LevelWheelchair Operation Turning the Power On/OffOperating the Wheelchair Joystick ActionMovement Action Using the Joystick to Drive the WheelchairSpeedometer On/Off ButtonSpeed Control Buttons Service IndicatorJoystick Charger/Programming InputInformation Gauge Display MPJ+ Joystick Switches and IndicatorsDrive Select Toggle Switch LCD Display Screens Speed ControlLCD Display LCD Display Screens Driving Icon Programmable Mono Port 1/2 or External Mode SwitchMemory Card Slot Remote On/Off SwitchMode Switch Asba Seat Model Preparing the Joystick for UseRepositioning the Joystick 10 Repositioning the Joystick Asba Seat Model Van Seat ModelSPJ+ Joysticks Disconnecting/Connecting the JoysticksMPJ+ Joysticks 13 Disconnecting/Connecting the Joysticks MPJ+ JoysticksInstalling Installing/Removing Flip Back ArmrestsArms RemovingAdjusting Adjusting Flip Back ArmrestsPositioning Flip Back Armrests for User Transfer Positioning Flip Back Armrests for UseHeight Adjusting Van Seat ArmrestsAngle Adjusting Van Seat Armrests Seat Adjusting the HeadrestAdjusting the Back Angle Adjustable Seat Back Angle Asba Model Removing/Installing the Seat Assembly Adjusting the Seat Height Asba Model Adjusting Seat Position on Seat FrameDo not Use Adjusting Seat Depth Van Seat OnlyReplacing the Seat Positioning Strap Adjusting Seat Depth Van Seat OnlyReplacing the Seat Positioning Strap Asba Model Removing/Installing the Footboard Assembly Footboard AssemblyRemoving/Installing the Footboard Assembly Adjusting the Footboard AssemblyDepth Adjusting the Footboard Assembly DepthFront Riggings Installing/Removing Front RiggingsModel PH904A and PHAL4A Adjusting Footrest HeightModel PHWH93 Raising/Lowering Elevating Front Riggings Replacing Heel LoopsFront Riggings Standard Position Inch OUT Inches OUT Adjusting/Replacing Telescoping Front Rigging Supports AsbaAdjusting/Replacing Telescoping Front Rigging Supports Asba Replacing the Flat Free Tires on the Wheel Rim Removing/Installing the ShroudsSHROUD/WHEELS Engaging/Disengaging Motor Release Lever Removing/Installing the ShroudsEngaging/Disengaging Motor Release Lever Replacing Front/Rear Caster AssembliesAdjusting Forks Adjusting ForksBatteries Tool QTY Comments Installing/Removing the BatteriesInstalling/Removing the Batteries Connecting/Disconnecting the Battery Wiring Harness Disconnecting ConnectingCharging Batteries Connecting/Disconnecting the Battery Wiring HarnessSPJ+ Joysticks When to Charge BatteriesMPJ+ Joystick Battery Charger OperationOn-Board Battery Charger Yellow Charging Indicator StatusIndependent Charger Independent ChargerBatteries USA Limited Warranty

Pronto M71 specifications

The Invacare Pronto M71 is a state-of-the-art power wheelchair designed for users seeking enhanced mobility and independence. Known for its compact design, the Pronto M71 is versatile enough for both indoor and outdoor use, making it an ideal choice for individuals with varying mobility needs.

One of the standout features of the Pronto M71 is its advanced SureStep technology. This innovative system allows the wheelchair to navigate over obstacles and transitions smoothly, ensuring users can move confidently across uneven surfaces. The SureStep system features a unique suspension mechanism that helps maintain stability and control, which is particularly beneficial when negotiating ramps or curbs.

The Pronto M71 is powered by a robust drivetrain comprised of strong motors that provide reliable performance. It is equipped with dual motors that enhance maneuverability, allowing the chair to turn on a dime and navigate tight spaces with ease. The wheelchair's rear-wheel drive design further contributes to its stability and straight-line tracking, giving users a sense of security during transit.

Comfort is a top priority for Invacare, and the Pronto M71 is no exception. The chair features adjustable seating systems, providing users with the option to customize their seating to fit their specific needs. This includes adjustable armrests, seat depth, and back height, ensuring maximum comfort for users during extended periods of use.

In terms of safety, the Pronto M71 is designed with thoughtful features that prioritize user protection. The chair comes with anti-tip technology, ensuring stability when navigating slopes or uneven terrain. Additionally, powerful brakes provide dependable stopping performance, giving users confidence in their mobility.

Another notable characteristic of the Pronto M71 is its user-friendly controls. The joystick controller is intuitive and easy to operate, allowing for effortless navigation. The buttons are designed for simplicity, making it accessible for users of all ages and abilities.

The Pronto M71 also supports various accessories, including trays, cup holders, and custom seating, making it a highly adaptable solution to meet individual user preferences.

Overall, the Invacare Pronto M71 power wheelchair is a remarkable blend of technology, comfort, and safety. Whether users are navigating their home or exploring the outdoors, the Pronto M71 offers the performance and reliability needed to enjoy an active and independent lifestyle. Its innovative features and focus on user experience make it a top choice in the market for power wheelchairs.