OPERATING THE LIFT
DETAIL “A”
Shifter | Base | Base |
|
Handle | Closed | Open | Shifter |
|
|
| Handle |
Mounting |
|
|
|
Hole |
|
|
|
Lock Pin | Locked |
|
|
|
|
| |
DETAIL “B” |
| DETAIL “C” |
|
|
|
| |
Steering |
| Steering |
|
| Handle |
| |
Handle |
|
| |
|
|
| |
Mast | Shifter | Shifter | Mast |
Handle | Handle |
FIGURE 3.1 Opening the Legs of the Adjustable Base
Raising/Lowering Model Hydraulic Lifts
NOTE: For this procedure, refer to FIGURE 3.2 on page 16.
Raising the Lift
1.Ensure the control valve is in the closed position (control valve positioned towards pump handle).
2.Move the pump handle up and down to raise the lift.
Lowering the Lift
1.Ensure the control valve is in the open position (control valve positioned away from pump handle).
2.Move the pump handle up and down to lower the lift.
NOTE: The rate of descent is controlled by varying the amount that the control valve is opened.
NOTE: A safety gate is part of the hydraulic system that maintains a SLOW constant descent of the boom regardless of how far the control valve is opened.