AL065 Wiring Harness Black Adhesive Clip

7. The Rotation Limit Collars are attached to the Post with 1/4-20 bolts. If you need to adjust the height of the power frame, you may change the vertical position of the rotation limit collars along the post. To do so the post is equipped with a series of holes to accept the bolt from the rotation limit collars. The close together holes are for fine adjustments and the others are for larger adjustments.

Caution: Both rotation limit collars must be bolted to the post for the lift to operate. Do not add any additional holes to the post or modify any part of the lift.

8. Plug the AL065 Wiring Harness into the black plug on the
Vehicle Wiring Harness. Route the Al065 Wiring Harness along
the bottom of the Arm Assembly to the base of the Post. Secure
the wiring harness to the Arm Assembly using the adhesive black
plastic clips in the hardware pack. Position the female end of the
Al065 Wiring Harness where it can be easily accessed for
attaching the Hand Control. The user will need to attach and	AL065 Wiring Harness Black Adhesive Clip
remove the Hand Control each time they use the lift.

Caution: Attach the female end of the Wiring Harness so that it points down and will not collect water.

Caution: Read the operation instructions before performing

Step 9.

9.Plug the Hand Control into the AL065 Wiring Harness and into the motor on the Power Frame. You are now ready to test lift a chair. Lower the lift’s hook down and attach it the docking device on your chair. (See your docking device’s instructions for correct installation and operation.) Raise the chair and carefully swing it into the vehicles rear door or trunk. If the chair will not fit through the opening carefully swing it back out and return it to the ground.

You may need to adjust the location of the Arm Assembly (Figs. 1, 2, 3) or the location of the strap roller.

10.To move the Strap Roller, remove the Split Ring (like on a key chain) from the Clevis Pin. Pull out the Clevis Pin and Strap

Roller and replace it in the desired hole location.

11. The lift may be left assembled during transport. To do so you will need to secure the Power Frame so that it does not swing while the vehicle is in motion. Lower the strap hook and attach it to the oval shaped slot in the Arm Assembly. Tighten the strap until it is snug but not overly tight. Push on the power frame and verify that it can not hit the vehicle.

AL065 specifications

Harmar Mobility AL065 is a state-of-the-art vertical platform lift designed to enhance accessibility for individuals with mobility challenges. This exceptional product is perfect for both residential and commercial settings, offering an efficient vertical solution that allows seamless movement between different levels, especially where traditional ramps may not be feasible.

One of the standout features of the AL065 is its robust construction, equipped with a durable aluminum frame that ensures longevity and stability. This design not only provides strength but also keeps the lift lightweight, making installation easier. The lift's platform has a generous size, accommodating various mobility devices such as wheelchairs and scooters, making it versatile for different users.

The AL065 emphasizes safety, boasting a range of features including a non-slip platform surface and automatic safety barriers that prevent accidental falls. Its advanced control system is user-friendly, featuring a simple-to-operate control panel that can be accessed from both the upper and lower levels of the lift. Additionally, the lift ensures safety during operation with its emergency stop button and optional battery backup, allowing continued functionality even during power outages.

In terms of technology, the Harmar AL065 incorporates advanced hydraulic systems that provide smooth lifting and lowering actions. This technology minimizes noise during operation, contributing to a more pleasant experience. The lift is also designed with a weather-resistant finish, making it suitable for both indoor and outdoor applications.

The compact design of the AL065 allows for installation in tight spaces, and with its range of height options, it can accommodate different building specifications. Furthermore, the lift adheres to all applicable safety standards, ensuring peace of mind for users and installers alike.

Overall, the Harmar Mobility AL065 is a reliable and efficient solution for improving accessibility, combining functionality with user-centric design. Its modern features and technologies make it an excellent choice for those in need of a vertical lift, promoting independence and ease of movement within any environment. Whether for home use or in commercial settings, the AL065 stands out as a leader in mobility solutions.