Operation Instructions

•Inspect the Lifting Strap prior to each use. Contact your distributor if it shows signs of wear or fraying.

•Do not operate this lift until you dealer has satisfactorily instructed you in the proper operation of this lift.

•Always make sure the vehicle’s parking brake is firmly set before operation.

•Keep hands and feet from under the scooter or power chair as it is being lifted.

•Take care not to hold one of the buttons on the Hand Controller until the Lifting Strap switches direction. The UP button should always pull the strap up and vice versa. If your buttons cause opposite movement, contact your distributor.

Loading your Scooter or Power Chair —Trunk Applications

Note: Due to the wide variety of scooters, power chairs and vehicles, your dealer may offer a different method for Loading and Unloading your scooter. Please follow the guidelines they have offered.

•To assemble your lift, begin by inserting the Post into the Arm assembly. Next, slide the Power Frame onto the top of the Post. Line up the Red stripe on the Power Frame, Rotation Limit Collars, and Arm assembly.

•Plug the Hand Control into the Power Frame and into the AL 065 Harness.

•Swing the Power Frame toward the scooter.

•Maneuver the scooter parallel to the rear bumper and two inches behind the vehicle. Depending on the vehicle, it may be necessary to: remove the seat; fold down or remove the handle bar; remove accessories such as brackets, baskets, crutch holders, etc.

•With the docking device positioned directly under the Strap Hook, lower the Lifting Strap using the DOWN button on the Hand Control until the Strap Hook can be engaged into the docking device installed on the scooter or chair. Hook the docking device on the scooter or chair with the Strap Hook and remove any play in the strap by pushing the UP button on the Hand Control until tension is felt.

Caution: Ensure that the Lifting Strap is secure and taught and that it points straight down. Failure to do so could result in the scooter or chair swinging toward the operator of the vehicle.

•Raise the scooter or chair using the UP button until the scooter or chair is just above the trunk lip.

Caution: Stop lifting before the Strap Hook contacts the Strap Roller mounted on the Power Frame. Contact will result in damage to the lift. A properly adjusted and operated lift will avoid this.

•Swing the scooter or chair into the vehicle, ensuring that the scooter or chair does not contact the vehicle.

•With the scooter or chair positioned above its stowed position, lower the lift using the DOWN button on the Hand Controller. Continue lowing the Strap Hook slightly beyond the scooter touching the floor to allow removal of the Strap Hook from the Docking Device on the scooter or chair.

•To disassemble the lift, first raise the strap until the freed Strap Hook is about an inch away from the Power Frame. Unplug the Hand Control harness from both the Vehicle Harness and the Power Frame.

•Pull the Power Frame off the Post and lay it on the floor of the trunk. Then, pull the Post out of the Arm Assem- bly and set it down with the Power Frame.

AL065 specifications

Harmar Mobility AL065 is a state-of-the-art vertical platform lift designed to enhance accessibility for individuals with mobility challenges. This exceptional product is perfect for both residential and commercial settings, offering an efficient vertical solution that allows seamless movement between different levels, especially where traditional ramps may not be feasible.

One of the standout features of the AL065 is its robust construction, equipped with a durable aluminum frame that ensures longevity and stability. This design not only provides strength but also keeps the lift lightweight, making installation easier. The lift's platform has a generous size, accommodating various mobility devices such as wheelchairs and scooters, making it versatile for different users.

The AL065 emphasizes safety, boasting a range of features including a non-slip platform surface and automatic safety barriers that prevent accidental falls. Its advanced control system is user-friendly, featuring a simple-to-operate control panel that can be accessed from both the upper and lower levels of the lift. Additionally, the lift ensures safety during operation with its emergency stop button and optional battery backup, allowing continued functionality even during power outages.

In terms of technology, the Harmar AL065 incorporates advanced hydraulic systems that provide smooth lifting and lowering actions. This technology minimizes noise during operation, contributing to a more pleasant experience. The lift is also designed with a weather-resistant finish, making it suitable for both indoor and outdoor applications.

The compact design of the AL065 allows for installation in tight spaces, and with its range of height options, it can accommodate different building specifications. Furthermore, the lift adheres to all applicable safety standards, ensuring peace of mind for users and installers alike.

Overall, the Harmar Mobility AL065 is a reliable and efficient solution for improving accessibility, combining functionality with user-centric design. Its modern features and technologies make it an excellent choice for those in need of a vertical lift, promoting independence and ease of movement within any environment. Whether for home use or in commercial settings, the AL065 stands out as a leader in mobility solutions.