Tanita BD-815U instruction manual Safety Notes, Instructions for Measurement

Page 4

 

Safety Notes (continued)

 

 

Instructions for Measurement

 

GB

Please observe the following instructions for accurate measurement.

 

 

• Measurement may not be possible on a surface that is strongly vibrating. In such cases

 

 

transfer the equipment to a stable surface with little or no vibration.

 

 

• In the case to move to a place with a temperature difference of 36˚F (20˚C) or more, leave

 

 

it before use for 2 hours or more after moving.

 

 

• While taking measurements, please keep any persons using transmitters, such as a

 

 

cellular phone, away from the unit to avoid causing margin errors.

 

 

<Usage Conditions>

 

 

 

 

 

 

Temperature Range for Use : 41˚F - 95˚F (5˚C - 35˚C)

 

 

Relative Humidity

: 30% - 80% (without condensation)

 

 

 

 

 

<Storage Conditions>

Temperature Range of Environment : 14˚F - 122˚F (-10˚C - +50˚C)

Range of Relative Humidity : 10% - 90% (without condensation)

To avoid malfunctions, avoid storing the equipment where there is direct sunlight, significant temperature changes, the risk of dampness, a large amount of dust, in the vicinity of fires, or where there is the risk of receiving vibrations or shocks.

Explanation of terminology

• Capacity

 

GB

This shows the maximum weight that can be measured by the scale.

[Example]

 

In the case of Maximum capacity 33lb (15kg), it can measure up to 33lb (15kg).

 

* One exceeding the weighing capacity cannot be measured.

d

This shows the amount of one scale mark. In the case of a digital display, this shows the inter- val of the numeric value to change.

[Example]

In the case of Minimum Graduation 0.1oz (0 - 12lb) 0.2oz (12 - 33lb) or 2g (0 - 6kg) 5g (6 - 15kg) the display increases and decreases.

Extend Minimum Graduation

Enables changing precision of measurements.

Tare

The container, towel, blanket, etc., used when measuring weight is called “tare”.

To measure the net-weight after subtracting the weight of the tare is called "tare weighing."

<AC Adapter>

Model

AD-0920M

 

 

 

Input

120 VAC

60Hz

 

 

 

Output

9 VDC

200mA

 

 

 

To measure correctly

Do not measure at a place where the temperature fluctuates greatly.

Errors may be observed in the measured value. In the case to move to a place with a temperature difference of 36˚F (20˚C) or more, leave it before use for 2 hours or more after moving.

Do not use cellular phones or microwave therapy equipment near this equipment. It may not measure correctly due to equipment malfunction.

6

7

Image 4
Contents Professional Baby Scale BD-815UContents Maintenance Safety NotesSafety Notes Instructions for MeasurementAttachment Baby Basket Attachment & RemovalRemoval Confirmation of accessories FrontDisplay Panel BackUsing batteries Level gauge CheckMeasurement instructions When tare is not specifiedExtended Display Function Canceling the tare function Tare weighing functionDisplay Weight Gain Memory cancellationMemory Function Memory Value Recall MethodAuto Power Off Time Various Setting MethodsDisplay Hold Time When the display is held When the Weight Gain key is pressedWhen the Recall key is pressed Output Data FormatOutput Data Format GB Problem Check pointsTanita Corporation. All Rights Reserved BD8157001