Power Supply 
Using batteries
GB (1) Turn the scale | (3) Insert new batteries. |
and turn the finger screw on |
|
the battery cover counter- |
|
clockwise (as indicated) to |
|
release the screw. |
|
How to Set Up Correctly 
Use the scale in a firm, flat and stable location.
• Do not position it anywhere that is subject to direct |
| |
sunlight, near heating equipment, or directly in the | GB | |
path of an air conditioner outlet. | ||
| ||
• Do not use it anywhere that is subject to significant |
| |
temperature change. |
|
•Do not position it anywhere that is either damp or subject to high humidity.
• After positioning the scale, pick up the baby basket from both sides to confirm that the basket is not easily removed before use.
• Ensure that the lever is pushed in.
•When the batteries start to run low,
appears on the display panel as a warning.
All (four) batteries should be immediately replaced with new ones at the same time.
Note) Do not use a combination of alkaline and manganese batteries, as such an arrangement may result in equipment failure.
Note) Rechargeable batteries are NOT recom- mended.
•A set of standard batteries should last about one year (assuming four readings a day).
*Insert the batteries such that the negative terminals of the batter- ies are pushed up against the coils within the battery housing.
Image |
Level gauge Check
•Place the scale on a flat surface to ensure accurate measurement.
•Turn the four adjusters such that the air bub- ble in the level guide is positioned exactly in the center. Confirm that all four adjusters are in contact with the surface.
Level gauge
<View from above>
Red
Air bubble
Using the AC adapter
(1)Insert the AC adapter jack into the AC adapter inlet on the right side of the main
unit.
(2) Plug the AC adapter into the power outlet.
Caution
This equipment must be used with the included AC adapter.
Adjusters (4)
12 | 13 |