Panasonic WJ-MPU955A manual Default SYS.INI Contents

Page 43

Default SYS.INI Contents

Text appearing in blue is explanatory, and not part of the sys.ini file.

Interface section

The CPU can incorporate up to three Ethernet network interface cards.

[INTERFACES]

***{ Number of interfaces in the system}

Numinterfaces=3

The number used here is the number of the Ethernet ports on MPU955A CPU.

***{ Interface Definitions}

***{ Interface<Number>=<IPA>,<SUBNET MASK>,<BOOT SERVER IPA> }

***{ !! Note: The InterfaceX IPAs must match the MainX CPU

}

***{

hardware settings in order for the System to

}

***{

operate correctly!!

 

***{ MainA CPU }

In Standard System, the MPU955A CPU should use the IP addresses that follow. In this case, the {MainB CPU}’s interface numbers should be commented with asterisks.

Interface0=192.168.200.200,255.255.255.0,192.168.200.200 Interface0 is an interface for GX devices. (NTSC model only)

Interface1=172.18.0.1,255.255.0.0,172.18.0.1 Interface1 is an interface for system controller.

Interface2=172.16.192.1,255.255.0.0,172.16.192.1

Interface2 is used for SNMP, SNTP feature. (Not currently supported)

***{ MainB CPU }

In Redundant System, the second MPU955A CPU should use following IP addresses (remove the asterisks below). In this case, {MainA CPU}’s interface numbers should be commented with asterisks.

*Interface0=192.168.200.201,255,255,255,0,192.168.200.201

*Interface1=172.18.0.2,255.255.0.0,172.18.0.2

*Interface2=172.16.192.2,255.255.0.0,172.16.192.2

Frames section

Note: This section does not apply to the MPU955A system, and should not be changed.

[FRAMES]

 

***{ MX Frame definition from Admin file

}

***{ MXSW has format <num_rows>,<num_cols>,<interface_num> }

***{ All others use <num_functions>,<interface_num>

}

***{ All 0's used for digital-only systems.

}

MXSWFunction=0,0,0

MXCONTFunction=0,0

MXOSDFunction=0,0

MXDIOFunction=0,0

MXRMSFunction=0,0

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Operating Instructions For Your Safety Please Read the Following Text CARE- Fully For Canada Important Safety Instructions Network Security Disclaimer of WarrantyLimitation of Liability Trademarks and Registered TrademarksContents Appendix System FeaturesPreface GX System Ntsc model onlyPrecautions Document Convention Notification about System Units ReferencesWJ-MPU955A This page intentionally left blank Page Video Camera Functions Main FeaturesVideo Switch and Video Routing Operator FunctionsDigital Input and Output Functions Alarm Programming and HandlingTour Sequences Event OperationsStandard System GX System Examples Ntsc Model Only192.168.1.10 Redundant SystemEthernet Controllers Available System ControllersSX650 SubNode This page intentionally left blank Detailed Product Description Rear View Major Operating Controls and Their FunctionsLayout Front ViewPanel Details This page intentionally left blank Installations Mounting into the Rack InstallationsConnection of GX System Ntsc Model only System Controllers Ethernet-Based Controller SetupFor Manual Switchover Operation Connection with System DevicesUpdating System Software Active Indicator MeaningsFor Automatic Switchover Operation When Adding a Redundant CPU to a Standard SystemDigital Video Encoder Devices Setup from Admin ConsoleConnect with CPU DNS Setup Encoder ItselfDigital Video Decoder Devices Setup Decoder ItselfAdmin Console Setup Layer 3 Switching L3SWTime Management Utility Dhcp Setup Digital Disk Recorder ItselfComm Settings for communication with the CPU Digital Disk RecordersFull Matrix System Network Board Installation Matrix Switcher WJ-SX650 SeriesAdmin Console Setup Mode Switch SettingsVertical Interval Synchronization Video Connection between SubNode 4 and SubNode 6 Bridge Connect with Each SX650 SubNode via Coaxial CablesVideo Connection between SubNode 1 and SubNode 3 Bridge Video Connection between SubNode 2 and SubNode 3 BridgeLoop-thru Connection between SubNode 1 and SubNode Loop-thru Connection between SubNode 2 and SubNode Configuration Details Configuration File Modification Available ConfigurationsSystem Database Default SYS.INI Contents OSD section Procs sectionTimeDateFormat=1 RS232ALARM sectionUnit section LOG sectionSystem section Alarmtextdisplay sectionRouting section Sntp section Errorp sectionPort Switch PortsArea Priority Boot File Model Logical # Control Video Compensation ModelPassword Priority Timeout Name Class Area Local Switch PortDatabase Contents GX System Ntsc Model Only 172.18.0.200 Logical Model Video Unit Digital Channels Cam Address Bitrate Switch PortOperating Procedures with WV-CU950 Messages Displayed on Default Status LCD Display After LoginLCD Display Descriptions BlinkingID Display Function Login and LogoutOperation Start Login Operation End LogoutMonitor Lock Monitor Selection and Camera SelectionMonitor Selection Camera SelectionAdjustment of LCD Display and Buzzer Display Setting for ControllerLens Control Camera Site Accessories ControlPan/Tilt Control Wiper Control Call Preset PositionDefroster Control Operating ProcedureAuxiliary Control MON CamF075 CAM Unit01 Camera Function ControlCamera Function Shortcut Function Other Camera FunctionsTour Sequence Running SequenceGroup Sequence Monitor Display Control Alarm Arming Control Alarm ControlExample of Alarm Input Resulting Alarm Activation Alarm SelectionTo Cancel Alarms To Operate Alarm-related Camera ACKMON AlarmHist CAM 012300512 Controlling Digital Disk Recorder WJ-HD300A Series WJ-HD300A Series ControlRecorder Selection Displaying WJ-HD300A SeriesPlaying the Latest Recorded Image Multiscreen Segment SwitchingElectronic Zooming EL-ZOOM Repeat PlaybackManual Recording Search Mode Thumb Text CopySearch Mode List Text Copy Nr-A Cp-A Cpy1 Cpy2 Search PlaybackJogDial counterclockwise Decrements a parameter Date-and-time Search PlaybackRecording event search Available buttons and functions Data Copy window Main unitMain unit Available controls and functions Main unit VMD search3D joystick rightward B Moves the cursor to the right TIME&DATE CAM Marking searchMmm/DD/YYYY Hhmm Mar/17/2004 1200 AM Canceling FiltersTime & Date Search Playback Thumbnail windowOther Functions HD300 Setup 5OffHD300 Setup 5On Off System FunctionHD300 DiskSelect Nr-A Cp-A Cpy1 Cpy2 Canceling FiltersHD300 A-B Repeat Start End Cancel Disk SelectionCamMenu On 5Off Rst A.Rst Menu Function DescriptionsMenu Functions To Recall Menu FunctionsMenu Function Details Camera SetupAuto Mode BW ModeDigital Output Group PresetPatrol Learn OSD ControlVL Stat 009 On Off Blk AlmStat On Off BlkF3 Blk VL Hist 011 On Off Blk SysStat On Off BlkExample System Version Area ChangeOperator ID Controller IDAppendix When using Standard System No Redundant CPU TroubleshootingPower Related Failure CPU-Related ProblemsEncoder and Decoder-Related problems Ntsc model only System Controller-Related ProblemsMPEG2 For business users in the European Union SpecificationsStandard Accessories CD-ROMOsaka, Japan Http//panasonic.net

WJ-MPU955A specifications

The Panasonic WJ-MPU955A is a sophisticated multipurpose processor designed for professional video and graphics applications. It serves as a powerful solution for broadcasters and production teams seeking to elevate their content through high-quality imaging and advanced processing capabilities. This device stands out in the competitive landscape of video processing technology, combining robust features with cutting-edge innovations.

One of the defining features of the WJ-MPU955A is its versatile input and output configurations. It supports a wide range of video formats, enabling users to seamlessly switch between HD, SD, and even 4K resolutions. This flexibility is crucial for addressing the diverse demands of modern broadcasting environments, where various content sources and formats are frequently encountered.

The WJ-MPU955A employs high-performance processing algorithms that enhance image quality by reducing noise, improving color accuracy, and providing smooth transitions and effects. The advanced video scaling technology ensures that images are rendered with exceptional clarity and detail, regardless of the source resolution. This is particularly beneficial in live production scenarios, where real-time processing is essential.

Another significant characteristic of the WJ-MPU955A is its user-friendly interface, which simplifies operation and allows for efficient management of complex setups. The integrated control panel is designed to facilitate quick adjustments and modifications during a live broadcast, ensuring that production teams can maintain a high level of performance under pressure. Furthermore, the device can be integrated into larger production environments, allowing for centralized control via external systems.

In addition to its processing capabilities, the WJ-MPU955A supports comprehensive monitoring features. Users can visualize and analyze video signals in real-time, ensuring that any issues are promptly identified and addressed. This proactive approach to quality control is vital for maintaining broadcast standards.

The WJ-MPU955A also incorporates advances in connectivity technology, making it compatible with various network protocols and streaming standards. This ensures that content can be delivered across multiple platforms seamlessly, enhancing the overall viewing experience for audiences.

In summary, the Panasonic WJ-MPU955A is an exceptional multipurpose processor, offering a combination of advanced video processing, user-friendly controls, and versatile connectivity. Its robust features make it an ideal choice for professionals in the broadcasting and production industries, providing the tools needed to create high-quality content efficiently and effectively.
Top Page Image Contents