Panasonic WJ-MPU955A manual Marking search, Time&Date Cam

Page 73

Note: To delete the motion detection area, select "DELETE AREA" on the status bar by rotating the JogDial or pressing the +/– button. Then, move the "+" mark to the desired area with the joystick, and press the CAM (SET) button.

10.Select "SENSITIVITY" on the status bar by performing either of the following.

•Rotate the JogDial clockwise or counterclockwise.

•Press the + or – button.

Note: Depending on the position of the set detection areas, the sensitivity indications of the detection areas may be displayed overlapping each other.

11.Select the motion detection area by moving the 3D joy- stick to the right or left.

12.Select the sensitivity by performing either of the follow- ing.

•Rotate the JogDial clockwise or counterclockwise.

•Press the + or – button.

The sensitivity will be applied.

OFF: The motion detector is not activated on the camera channel.

LOW: The sensitivity level is low.

MID: The sensitivity is level is medium.

HIGH: The sensitivity level is high.

13.To exit the motion detection area setup window, press the CAM (SET) button.

The motion detection mode setup window will be dis- played on the monitor.

■VMD SEARCH

ANY AREA

 

 

 

 

 

 

 

MASKING DURATION

 

 

 

24H

VECTOR

 

 

 

 

 

 

 

A

20 s

B

20

s

C

20

s

D

DURATION

 

 

 

 

 

 

 

A

20 s

B

20

s

C

20

s

D 20 s

 

 

 

 

 

SET : [SET]

SEARCH : [PLAY]

CANCEL : [ESC]

Notes:

•To cancel the motion detection area setup, press the MON (ESC) button. The VMD search list window will be displayed again on the monitor.

•Refer to the unit's operating instructions for details on each detection mode.

14.Select a desired detection mode with the 3D joystick, and select a desired parameter by performing either of the following.

•Rotate the JogDial clockwise or counterclockwise.

•Press the + or – button.

15.Press the CAM (SET) or PLAY/PAUSE button.

The motion detection mode will be determined, and the VMD search list window will be displayed again on the monitor.

Notes:

•Refer to Step 2 for the screenshot.

•To cancel the setting and return to the motion detection area setup window, press the MON (ESC) or EXIT button.

16.Select a desired recording event by performing one of the following.

•Move the 3D joystick controller up or down.

•Rotate the JogDial clockwise or counterclockwise.

•Press the + or – button.

Note: To move to the next or previous page, perform either of the following.

•Move the zoom wheel controller to the right or left.

•Rotate the shuttle ring clockwise or counterclock- wise.

17.Press the PLAY button.

The playback of selected recording event will start.

18.To exit the search mode, press the MON (ESC) or EXIT button.

The live image will be displayed again on the monitor.

●Marking search

The recording time of the recorded images with a marked point will be displayed in a list or a thumbnail. For playback, you will select the desired recording time to play. (Refer to the recorder's operating instructions for details on marking.)

1.Select the recorder. (Refer to p. 67 Recorder Selection.)

2.Repeat pressing the SEARCH/T&D SEARCH button until the marking list window is displayed on the moni- tor.

The recorder will enter the searching mode.

TIME&DATE

CAM

 

APR.25.03*12:34:56 AM

01ch

 

APR.25.03*12:34:56 AM

01ch

 

APR.25.03*12:34:56 AM

01ch

 

APR.25.03*12:34:56 AM

01ch

 

APR.25.03*12:34:56 AM

01ch

 

APR.25.03*12:34:56 AM

01ch

 

APR.25.03*12:34:56 AM

01ch

 

APR.25.03*12:34:56 AM

01ch

 

APR.25.03*12:34:56 AM APR.25.03*12:34:56 AM TOTAL

12345

TIME&DATE SEARCH REC EVENT SEARCH VMD SEARCH MARK

3.Select the desired marked time by performing one of the following.

•Move the 3D joystick controller up or down.

•Rotate the JogDial clockwise or counterclockwise.

•Press the + or – button.

73

Page 72 Page 74
Image 73
Page 72 Page 74
Contents Operating Instructions For Your Safety Please Read the Following Text CARE- Fully For Canada Important Safety Instructions Limitation of Liability Disclaimer of WarrantyTrademarks and Registered Trademarks Network SecurityContents Appendix Preface FeaturesGX System Ntsc model only SystemPrecautions Document Convention Notification about System Units ReferencesWJ-MPU955A This page intentionally left blank Page Video Switch and Video Routing Main FeaturesOperator Functions Video Camera FunctionsTour Sequences Alarm Programming and HandlingEvent Operations Digital Input and Output FunctionsStandard System GX System Examples Ntsc Model Only192.168.1.10 Redundant SystemEthernet Controllers Available System ControllersSX650 SubNode This page intentionally left blank Detailed Product Description Layout Major Operating Controls and Their FunctionsFront View Rear ViewPanel Details This page intentionally left blank Installations Mounting into the Rack InstallationsConnection of GX System Ntsc Model only For Manual Switchover Operation Ethernet-Based Controller SetupConnection with System Devices System ControllersFor Automatic Switchover Operation Active Indicator MeaningsWhen Adding a Redundant CPU to a Standard System Updating System SoftwareDigital Video Encoder Devices Setup from Admin ConsoleConnect with CPU DNS Setup Encoder ItselfDigital Video Decoder Devices Setup Decoder ItselfAdmin Console Setup Layer 3 Switching L3SWTime Management Utility Comm Settings for communication with the CPU Setup Digital Disk Recorder ItselfDigital Disk Recorders DhcpFull Matrix System Network Board Installation Matrix Switcher WJ-SX650 SeriesAdmin Console Setup Mode Switch SettingsVertical Interval Synchronization Video Connection between SubNode 1 and SubNode 3 Bridge Connect with Each SX650 SubNode via Coaxial CablesVideo Connection between SubNode 2 and SubNode 3 Bridge Video Connection between SubNode 4 and SubNode 6 BridgeLoop-thru Connection between SubNode 1 and SubNode Loop-thru Connection between SubNode 2 and SubNode Configuration Details Configuration File Modification Available ConfigurationsSystem Database Default SYS.INI Contents OSD section Procs sectionUnit section RS232ALARM sectionLOG section TimeDateFormat=1System section Alarmtextdisplay sectionRouting section Sntp section Errorp sectionArea Priority Boot File Model Switch PortsLogical # Control Video Compensation Model PortPassword Priority Timeout Name Class Area Local Switch PortDatabase Contents GX System Ntsc Model Only 172.18.0.200 Logical Model Video Unit Digital Channels Cam Address Bitrate Switch PortOperating Procedures with WV-CU950 LCD Display Descriptions Default Status LCD Display After LoginBlinking Messages Displayed onOperation Start Login Login and LogoutOperation End Logout ID Display FunctionMonitor Selection Monitor Selection and Camera SelectionCamera Selection Monitor LockAdjustment of LCD Display and Buzzer Display Setting for ControllerLens Control Camera Site Accessories ControlPan/Tilt Control Wiper Control Call Preset PositionDefroster Control Operating ProcedureAuxiliary Control Camera Function Shortcut Function Camera Function ControlOther Camera Functions MON CamF075 CAM Unit01Tour Sequence Running SequenceGroup Sequence Monitor Display Control Example of Alarm Input Resulting Alarm Activation Alarm ControlAlarm Selection Alarm Arming ControlTo Cancel Alarms To Operate Alarm-related Camera ACKMON AlarmHist CAM 012300512 Recorder Selection WJ-HD300A Series ControlDisplaying WJ-HD300A Series Controlling Digital Disk Recorder WJ-HD300A SeriesElectronic Zooming EL-ZOOM Multiscreen Segment SwitchingRepeat Playback Playing the Latest Recorded ImageSearch Mode List Text Copy Nr-A Cp-A Cpy1 Cpy2 Search Mode Thumb Text CopySearch Playback Manual RecordingRecording event search Date-and-time Search PlaybackAvailable buttons and functions Data Copy window Main unit JogDial counterclockwise Decrements a parameterMain unit Available controls and functions Main unit VMD search3D joystick rightward B Moves the cursor to the right TIME&DATE CAM Marking searchTime & Date Search Playback Canceling FiltersThumbnail window Mmm/DD/YYYY Hhmm Mar/17/2004 1200 AMHD300 Setup 5On Off HD300 Setup 5OffSystem Function Other FunctionsHD300 A-B Repeat Start End Cancel Canceling FiltersDisk Selection HD300 DiskSelect Nr-A Cp-A Cpy1 Cpy2Menu Functions Menu Function DescriptionsTo Recall Menu Functions CamMenu On 5Off Rst A.RstAuto Mode Camera SetupBW Mode Menu Function DetailsPatrol Learn Group PresetOSD Control Digital OutputVL Stat 009 On Off Blk AlmStat On Off BlkF3 Blk VL Hist 011 On Off Blk SysStat On Off BlkExample Operator ID Area ChangeController ID System VersionAppendix Power Related Failure TroubleshootingCPU-Related Problems When using Standard System No Redundant CPUEncoder and Decoder-Related problems Ntsc model only System Controller-Related ProblemsMPEG2 Standard Accessories SpecificationsCD-ROM For business users in the European UnionOsaka, Japan Http//panasonic.net

WJ-MPU955A specifications

The Panasonic WJ-MPU955A is a sophisticated multipurpose processor designed for professional video and graphics applications. It serves as a powerful solution for broadcasters and production teams seeking to elevate their content through high-quality imaging and advanced processing capabilities. This device stands out in the competitive landscape of video processing technology, combining robust features with cutting-edge innovations.

One of the defining features of the WJ-MPU955A is its versatile input and output configurations. It supports a wide range of video formats, enabling users to seamlessly switch between HD, SD, and even 4K resolutions. This flexibility is crucial for addressing the diverse demands of modern broadcasting environments, where various content sources and formats are frequently encountered.

The WJ-MPU955A employs high-performance processing algorithms that enhance image quality by reducing noise, improving color accuracy, and providing smooth transitions and effects. The advanced video scaling technology ensures that images are rendered with exceptional clarity and detail, regardless of the source resolution. This is particularly beneficial in live production scenarios, where real-time processing is essential.

Another significant characteristic of the WJ-MPU955A is its user-friendly interface, which simplifies operation and allows for efficient management of complex setups. The integrated control panel is designed to facilitate quick adjustments and modifications during a live broadcast, ensuring that production teams can maintain a high level of performance under pressure. Furthermore, the device can be integrated into larger production environments, allowing for centralized control via external systems.

In addition to its processing capabilities, the WJ-MPU955A supports comprehensive monitoring features. Users can visualize and analyze video signals in real-time, ensuring that any issues are promptly identified and addressed. This proactive approach to quality control is vital for maintaining broadcast standards.

The WJ-MPU955A also incorporates advances in connectivity technology, making it compatible with various network protocols and streaming standards. This ensures that content can be delivered across multiple platforms seamlessly, enhancing the overall viewing experience for audiences.

In summary, the Panasonic WJ-MPU955A is an exceptional multipurpose processor, offering a combination of advanced video processing, user-friendly controls, and versatile connectivity. Its robust features make it an ideal choice for professionals in the broadcasting and production industries, providing the tools needed to create high-quality content efficiently and effectively.
Top Page Image Contents