Panasonic WJ-MPU955A manual Alarm Control, Example of Alarm Input Resulting Alarm Activation

Page 64

Alarm Control

Example of Alarm Input and

Resulting Alarm Activation

The following is an example of an alarm input and the resulting alarm activation.

Basic Setup

Note: Refer to the Admin Console User's Guide for details on setup.

Alarm Input #1 activates Gseq (Group Sequence) #1 as Alarm Action #0. The Group Sequence has priority 12.

Monitor #1, #2, #3 and #4 are assigned to run the sequence.

The target monitor is Monitor #5. The images are dis- played in the hold mode.

Monitor #5 displays the images of Camera #5 in spot mode.

Alarm Behaviors

1.Alarm #1 is activated.

2.Monitor #5 displays the alarm indication "ALM", "A1" (Alarm #1), and "-0" (Action #0) to indicate that Alarm #1 is activated. (Refer to the illustration.)

3.Gseq (Group Sequence) #1 runs on Monitor #1, #2, #3 and #4 with the lowest priority (Refer to the illustration.).

4.You will select Alarm #1.

5.You will press the ALARM/ALM SUSPEND button, and then press the ALM RESET/ALM ALL RESET button. Alarm #1 will be reset, and "ALM" will disappear from Monitor #5. (However, GSeq #1 continues to run on the monitors.)

6.To stop the sequence on the monitors, you will select one of the monitors by pressing the MON (ESC) button. Then, you will press the STOP button.

M1

G1 R

M2

G1 R

 

M3

G1 R

M4

G1 R

M5 ALMA1-0

Group Sequence Monitors

Target Monitor

Alarm Selection

To control alarm behaviors, you need to select a desired alarm number.

1.Select a desired alarm number by pressing the numer- ic buttons.

MON

1

CAM

0123

Unit:01

00512

2.Press the ALARM/ALM SUSPEND button.

The current status of selected alarm will be displayed on the LCD.

MON Alarm00001 CAM

0123 Armed 00512

Armed: The system is armed for alarm response.

Active: Alarm has been triggered and activated assigned alarm response.

Ack: Alarm is acknowledged and an operator can con- trol the alarm action.

Reset: Activated alarm is reset, but the alarm device is still active.

Disarm: The system is disarmed for alarm response.

Clear: Auto arming is not set in the admin console.

3.To select the next alarm number, press the + button. To select the previous alarm number, press the – but- ton.

Alarm Arming Control

1.Select a desired alarm. (Refer to Alarm Selection.)

2.Every time you press the ALARM/ALM SUSPEND but- ton, the selected alarm will be armed or disarmed. When an alarm is disarmed, the LCD display will become as follows.

MON Alarm00001 CAM

0123 Disarm 00512

3.To exit the alarm mode, press the CLEAR button. The LCD display will become as follows.

MON Alarm Exit CAM

0123 Unit:01 00512

64

Image 64
Contents Operating Instructions For Your Safety Please Read the Following Text CARE- Fully For Canada Important Safety Instructions Disclaimer of Warranty Limitation of LiabilityTrademarks and Registered Trademarks Network SecurityContents Appendix Features PrefaceGX System Ntsc model only SystemPrecautions Document Convention Notification about System Units ReferencesWJ-MPU955A This page intentionally left blank Page Main Features Video Switch and Video RoutingOperator Functions Video Camera FunctionsAlarm Programming and Handling Tour SequencesEvent Operations Digital Input and Output FunctionsGX System Examples Ntsc Model Only Standard SystemRedundant System 192.168.1.10Available System Controllers Ethernet ControllersSX650 SubNode This page intentionally left blank Detailed Product Description Major Operating Controls and Their Functions LayoutFront View Rear ViewPanel Details This page intentionally left blank Installations Installations Mounting into the RackConnection of GX System Ntsc Model only Ethernet-Based Controller Setup For Manual Switchover OperationConnection with System Devices System ControllersActive Indicator Meanings For Automatic Switchover OperationWhen Adding a Redundant CPU to a Standard System Updating System SoftwareDigital Video Encoder Devices Setup from Admin ConsoleConnect with CPU Setup Encoder Itself DNSSetup Decoder Itself Digital Video Decoder DevicesAdmin Console Setup Layer 3 Switching L3SWTime Management Utility Setup Digital Disk Recorder Itself Comm Settings for communication with the CPUDigital Disk Recorders DhcpFull Matrix System Matrix Switcher WJ-SX650 Series Network Board InstallationAdmin Console Setup Mode Switch SettingsVertical Interval Synchronization Connect with Each SX650 SubNode via Coaxial Cables Video Connection between SubNode 1 and SubNode 3 BridgeVideo Connection between SubNode 2 and SubNode 3 Bridge Video Connection between SubNode 4 and SubNode 6 BridgeLoop-thru Connection between SubNode 1 and SubNode Loop-thru Connection between SubNode 2 and SubNode Configuration Details Configuration File Modification Available ConfigurationsSystem Database Default SYS.INI Contents Procs section OSD sectionRS232ALARM section Unit sectionLOG section TimeDateFormat=1System section Alarmtextdisplay sectionRouting section Errorp section Sntp sectionSwitch Ports Area Priority Boot File ModelLogical # Control Video Compensation Model PortArea Local Switch Port Password Priority Timeout Name ClassDatabase Contents GX System Ntsc Model Only 172.18.0.200 Unit Digital Channels Cam Address Bitrate Switch Port Logical Model VideoOperating Procedures with WV-CU950 Default Status LCD Display After Login LCD Display DescriptionsBlinking Messages Displayed onLogin and Logout Operation Start LoginOperation End Logout ID Display FunctionMonitor Selection and Camera Selection Monitor SelectionCamera Selection Monitor LockDisplay Setting for Controller Adjustment of LCD Display and BuzzerLens Control Camera Site Accessories ControlPan/Tilt Control Call Preset Position Wiper ControlDefroster Control Operating ProcedureAuxiliary Control Camera Function Control Camera Function Shortcut FunctionOther Camera Functions MON CamF075 CAM Unit01Tour Sequence Running SequenceGroup Sequence Monitor Display Control Alarm Control Example of Alarm Input Resulting Alarm ActivationAlarm Selection Alarm Arming ControlTo Operate Alarm-related Camera ACK To Cancel AlarmsMON AlarmHist CAM 012300512 WJ-HD300A Series Control Recorder SelectionDisplaying WJ-HD300A Series Controlling Digital Disk Recorder WJ-HD300A SeriesMultiscreen Segment Switching Electronic Zooming EL-ZOOMRepeat Playback Playing the Latest Recorded ImageSearch Mode Thumb Text Copy Search Mode List Text Copy Nr-A Cp-A Cpy1 Cpy2Search Playback Manual RecordingDate-and-time Search Playback Recording event searchAvailable buttons and functions Data Copy window Main unit JogDial counterclockwise Decrements a parameterMain unit Available controls and functions Main unit VMD search3D joystick rightward B Moves the cursor to the right Marking search TIME&DATE CAMCanceling Filters Time & Date Search PlaybackThumbnail window Mmm/DD/YYYY Hhmm Mar/17/2004 1200 AMHD300 Setup 5Off HD300 Setup 5On OffSystem Function Other FunctionsCanceling Filters HD300 A-B Repeat Start End CancelDisk Selection HD300 DiskSelect Nr-A Cp-A Cpy1 Cpy2Menu Function Descriptions Menu FunctionsTo Recall Menu Functions CamMenu On 5Off Rst A.RstCamera Setup Auto ModeBW Mode Menu Function DetailsGroup Preset Patrol LearnOSD Control Digital OutputVL Stat 009 On Off Blk AlmStat On Off BlkF3 Blk VL Hist 011 On Off Blk SysStat On Off BlkExample Area Change Operator IDController ID System VersionAppendix Troubleshooting Power Related FailureCPU-Related Problems When using Standard System No Redundant CPUEncoder and Decoder-Related problems Ntsc model only System Controller-Related ProblemsMPEG2 Specifications Standard AccessoriesCD-ROM For business users in the European UnionOsaka, Japan Http//panasonic.net

WJ-MPU955A specifications

The Panasonic WJ-MPU955A is a sophisticated multipurpose processor designed for professional video and graphics applications. It serves as a powerful solution for broadcasters and production teams seeking to elevate their content through high-quality imaging and advanced processing capabilities. This device stands out in the competitive landscape of video processing technology, combining robust features with cutting-edge innovations.

One of the defining features of the WJ-MPU955A is its versatile input and output configurations. It supports a wide range of video formats, enabling users to seamlessly switch between HD, SD, and even 4K resolutions. This flexibility is crucial for addressing the diverse demands of modern broadcasting environments, where various content sources and formats are frequently encountered.

The WJ-MPU955A employs high-performance processing algorithms that enhance image quality by reducing noise, improving color accuracy, and providing smooth transitions and effects. The advanced video scaling technology ensures that images are rendered with exceptional clarity and detail, regardless of the source resolution. This is particularly beneficial in live production scenarios, where real-time processing is essential.

Another significant characteristic of the WJ-MPU955A is its user-friendly interface, which simplifies operation and allows for efficient management of complex setups. The integrated control panel is designed to facilitate quick adjustments and modifications during a live broadcast, ensuring that production teams can maintain a high level of performance under pressure. Furthermore, the device can be integrated into larger production environments, allowing for centralized control via external systems.

In addition to its processing capabilities, the WJ-MPU955A supports comprehensive monitoring features. Users can visualize and analyze video signals in real-time, ensuring that any issues are promptly identified and addressed. This proactive approach to quality control is vital for maintaining broadcast standards.

The WJ-MPU955A also incorporates advances in connectivity technology, making it compatible with various network protocols and streaming standards. This ensures that content can be delivered across multiple platforms seamlessly, enhancing the overall viewing experience for audiences.

In summary, the Panasonic WJ-MPU955A is an exceptional multipurpose processor, offering a combination of advanced video processing, user-friendly controls, and versatile connectivity. Its robust features make it an ideal choice for professionals in the broadcasting and production industries, providing the tools needed to create high-quality content efficiently and effectively.