ResMed AutoSet CS, VPAP S, S9 Auto 25 manual Problem/Possible cause Solution

Page 7

Problem/Possible cause

Solution

 

Device does not stop when you remove your mask

 

 

SmartStart/Stop is disabled.

Enable SmartStart/Stop.

Note: SmartStart/Stop is not available if

 

Leak Alert is enabled.

 

SmartStart/Stop is enabled but the device does not stop automatically when you remove your mask

Incompatible mask system being used.

Only use equipment recommended by ResMed.

The patient is using a nasal pillows

Disable SmartStart/Stop.

mask or pediatric mask with a set

 

pressure less than 7 cm H2O.

 

Pressure rises inappropriately

 

 

 

Talking, coughing or breathing in an

Avoid talking with a nasal mask on, and breathe as normally

unusual manner.

as possible.

Mask cushion is buzzing against the

Adjust the headgear.

skin.

 

Cushion seated incorrectly causing

Adjust headgear or re-fit cushion.

excessive leak.

 

 

Displays error message: High temperature fault, refer to user manual

Device has been left in a hot

Allow to cool before re-use. Disconnect the power cord

environment.

and then reconnect it to restart the device.

Air filter is blocked.

Replace your air filter. Disconnect the power cord and then

 

reconnect it to restart the device.

Air tubing is blocked.

Check your air tubing and remove any blockages.

 

Disconnect the power cord and then reconnect it to restart

 

the device.

Humidifier setting is too high, resulting

Turn the humidifier setting down and empty the water from

in accumulation of water in the air

the air tubing.

tubing.

 

5 English

Image 7
Contents Vpap ST Page S9 Auto 25 indications for use S9 Vpap ST indications for useS9 Vpap S indications for use S9 AutoSet CS indications for useControl panel Masks and humidifiers SetupNavigating the menus Getting started Cleaning and maintenanceProblem/Possible cause TroubleshootingProblem/Possible cause Solution Will not be re-displayed SD card Technical specificationsDevice can be higher than the temperature of the room Pneumatic flow path SymbolsServicing Limited warrantyEnvironmental information English English English
Related manuals
Manual 2 pages 23.72 Kb

AutoSet CS, S9 Auto 25, VPAP S specifications

ResMed, a leader in sleep and respiratory care, has developed a range of advanced devices designed to enhance the quality of life for those suffering from sleep apnea and other respiratory conditions. Among these, the ResMed AutoSet CS, S9 Auto 25, and VPAP S stand out due to their innovative features and technologies aimed at providing personalized therapy.

The ResMed AutoSet CS is engineered to offer adaptive therapy for patients facing complex sleep apnea. This device utilizes advanced algorithms that continuously assess the patient’s breathing patterns throughout the night. By analyzing flow limitation, apnea, and hypopnea events in real time, it adjusts the pressure delivered to ensure optimal airflow. The AutoSet CS is particularly beneficial for those who experience varying levels of airway obstruction, providing a tailored response that improves overall comfort and efficacy.

The S9 Auto 25 is another remarkable device, distinguished by its user-friendly interface and sleek design. This auto-titrating CPAP device automatically adjusts pressure levels based on the patient’s needs throughout the night. It incorporates ResMed’s QuietAir technology, ensuring a quieter operation, which promotes a peaceful sleep environment. Additionally, the S9 Auto 25 features an integrated humidification system that delivers moisture to the airflow, preventing dryness and irritation, which are common complaints among CPAP users.

The VPAP S represents ResMed’s commitment to providing bi-level positive airway pressure therapy. It offers two distinct pressure settings: one for inhalation and a lower setting for exhalation. This dual-pressure mechanism allows for a more natural breathing experience, particularly beneficial for those with more severe forms of apnea. The VPAP S also features Easy-Breathe technology, which smooths out pressure transitions, making it easier for patients to breathe naturally and comfortably through the night.

Key characteristics shared by these devices include advanced data tracking and reporting capabilities. Users can access valuable insights into their therapy through user-friendly interfaces or companion apps, facilitating better management of their condition. Each model is designed with portability in mind, ensuring patients can receive effective therapy whether at home or on the go. With ResMed’s commitment to innovation, the AutoSet CS, S9 Auto 25, and VPAP S are pivotal in transforming the landscape of sleep apnea treatment, providing patients with effective, comfortable, and adaptable therapy solutions.